HPE6-A86 Exam Training Practice Tests (HPE Network Switching Associate)]

Question 1

You are planning a 40Gbps link between two sites 35km apart. What type of cable will be required?

A. UTP B. Multi-mode fiber C. Single-mode fiber D. ZTP

Correct Answer: C

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Question 2

How do you configure an in-band management IP address for the CX 4100i switch?

A. interface vlan 1
ip address 10.10.10.10/24
routing B. interface mgmt
ip address 10.10.10.10/24 C. interface vlan 1
ip address 10.10.10.10/24 D. interface mgmt
ip address 10.10.10.10/24
routing

Correct Answer: A

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Question 3

What is a valid way to explain the benefits of HPE Aruba Networking Central?

A. The switch firmware repository is provided as a central TFTP service. B. The platform utilizes micro-architecture design. C. SNMPv3 is used for secure polling of the switch information. D. Users can schedule when HPE Aruba Networking Central upgrades are committed.

Correct Answer: D

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Question 4

A switch port connected to an end-user workstation should never receive Bridge Protocol Data Units (BPDUs). Which feature helps protect the network if a switch is accidentally connected to that port?

A. Link Aggregation B. DHCP Relay C. BPDU Protection D. Loopback Detection

Correct Answer: C

Question 5

On a switched infrastructure using spanning tree, what entity defines the best path for traffic in an HPE Aruba Networking CX environment?

A. alternative bridge B. common bridge C. root bridge D. designated bridge

Correct Answer: C

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Question 6

Drag and Drop Question
Match the device stacking/clustering features to the correct device family when selecting an HPE Aruba Networking CX switch series for a use case where a device failure needs to be protected by utilizing HPE Aruba Networking OS capabilities. (Matches may be used more than once.)

Correct Answer:

Explanation:
The CX 6200 and CX 6300 series support large VSF stacks, enabling multi-member single- control-plane resiliency. The CX 6100 supports VSF with a smaller maximum stack size. The CX
8100 does not support VSF but instead uses VSX, where two independent switches provide redundancy. The CX 4100i does not support VSF or VSX, so no OS-based device redundancy is available.

HPE Network Switching Associate - HPE6-A86 Exam Practice Test