Microsoft Upgrading Your Skills to MCSA: Windows Server 2016 - 070-743 Exam Practice Test
You have a server named Served that runs Windows Server 2016. Server1 will be used as a VPN server. You need to configure Server1 to support VPN Reconnect. Which VPN protocol should you use?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 has a virtual machine named VM1. VM1 is configured to run the Docker daemon.
On VM1, you have a container network that uses transparent mode.
You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP.
What should you do?
Server1 has a virtual machine named VM1. VM1 is configured to run the Docker daemon.
On VM1, you have a container network that uses transparent mode.
You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP.
What should you do?
Correct Answer: D
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1.
You need to configure the Docker daemon to accept connections only on TCP port 64500.
What should you do?
You need to configure the Docker daemon to accept connections only on TCP port 64500.
What should you do?
Correct Answer: C
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
You have a server named Server1 that runs Windows Server 2016.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Correct Answer:
Explanation
Deploy Network Controller using Windows PowerShell
Step 1: Install-WindowsFeature
Install the Network Controller server role
To install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER.
Install-WindowsFeature -Name NetworkController -IncludeManagementTools
Step 2: New-NetworkControllerNodeObject
You can create a Network Controller cluster by creating a node object andthen configuring the cluster.
You need to create a node object for each computer or VM that is a member of the Network Controller cluster.
Tocreate a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
New-NetworkControllerNodeObject -Name <string> -Server<String> -FaultDomain <string>-RestInte Step 3: Install-NetworkControllerCluster To configure the cluster, typethe following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkControllerCluster -Node <NetworkControllerNode[]> -ClusterAuthentication ...
Step 4: Install-NetworkController
To configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkController -Node <NetworkControllerNode[]> -ClientAuthentication References: https://technet.microsoft.com/en-us/library/mt282165.aspx
You have a server named Server1 that runs Windows Server 2016.
On Server1, you have a custom image of Windows Server 2016 Standard in a file named Image1.wim. The image is mounted to C:\Folder1.
You discover corrupted files in the WinSxS folder of the mounted image.
From the Windows Server 2016 installation media, you mount an image of Windows Server 2016 Standard from Install.wim to C:\Folder2.
You need to repair the corrupted image.
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
On Server1, you have a custom image of Windows Server 2016 Standard in a file named Image1.wim. The image is mounted to C:\Folder1.
You discover corrupted files in the WinSxS folder of the mounted image.
From the Windows Server 2016 installation media, you mount an image of Windows Server 2016 Standard from Install.wim to C:\Folder2.
You need to repair the corrupted image.
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/repair-a-windows-image
You have a virtual machine named VM1 that runs Windows Server 2016. VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.
Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.
Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.
Correct Answer:
Explanation
References:
https://technet.microsoft.com/en-us/library/dn464289.aspx
Note: This question is part of a series of questions that present the same scenario.
Each question in the series contains a unique solution that might meet the stated goals.
Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.Server1 hosts a virtual machine named VM1 that runs Windows Server 2016.You need to identify whether SR-IOV is used by VM1.Solution: You sign in to VM1. You view the properties of the network connections.Does this meet the goal?
Each question in the series contains a unique solution that might meet the stated goals.
Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.Server1 hosts a virtual machine named VM1 that runs Windows Server 2016.You need to identify whether SR-IOV is used by VM1.Solution: You sign in to VM1. You view the properties of the network connections.Does this meet the goal?
Correct Answer: A
Your Network contains one Active Directory domain named contoso.com.
You pilot DirectAccess on the network.
During the pilot deployment, you enable DirectAccess only for a group Contoso\Test Computers.
Once the pilot is complete, you need to enable DirectAccess for all the client computers in the domain.
What should you do?
You pilot DirectAccess on the network.
During the pilot deployment, you enable DirectAccess only for a group Contoso\Test Computers.
Once the pilot is complete, you need to enable DirectAccess for all the client computers in the domain.
What should you do?
Correct Answer: A
You have a RADIUS server named RADIUS1. RADIUS1 is configured to use an IP address of
172.23.100.101.
You add a wireless access point (wap) named WAP-Secure to your network. You configure WAP-Secure to use an IP address of 10.0.100.101.
You need to ensure that WAP-Secure can authenticate to RADIUS1 by using a shared secret key.
What command should you run? To answer, select the appropriate options in answer area.
172.23.100.101.
You add a wireless access point (wap) named WAP-Secure to your network. You configure WAP-Secure to use an IP address of 10.0.100.101.
You need to ensure that WAP-Secure can authenticate to RADIUS1 by using a shared secret key.
What command should you run? To answer, select the appropriate options in answer area.
Correct Answer:
You have a server named Server1 that runs Windows Server 2016.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Correct Answer:
Explanation
Deploy Network Controller using Windows PowerShell
Step 1: Install-WindowsFeature
Install the Network Controller server role
To install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER.
Install-WindowsFeature -Name NetworkController -IncludeManagementTools
Step 2: New-NetworkControllerNodeObject
You can create a Network Controller cluster by creating a node object andthen configuring the cluster.
You need to create a node object for each computer or VM that is a member of the Network Controller cluster.
Tocreate a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
New-NetworkControllerNodeObject -Name <string> -Server<String> -FaultDomain <string>-RestInte Step 3: Install-NetworkControllerCluster To configure the cluster, typethe following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkControllerCluster -Node <NetworkControllerNode[]> -ClusterAuthentication ...
Step 4: Install-NetworkController
To configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkController -Node <NetworkControllerNode[]> -ClientAuthentication References: https://technet.microsoft.com/en-us/library/mt282165.aspx
You have two servers named Server1 and Server2 that run Windows Server 2016.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2.
You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.
Which cmdlet should you run?
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2.
You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.
Which cmdlet should you run?
Correct Answer: B
Your company has a testing environment that contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016. Server1 has IP Address Management (IPAM) installed. IPAM has the following configuration.
The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit. (Click the Exhibit button.)
The group policy configurations are shown in the GPO exhibit. (Click the Exhibit button.) For each of the following statements, select Yes if the statement is true. Otherwise, select No.
The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit. (Click the Exhibit button.)
The group policy configurations are shown in the GPO exhibit. (Click the Exhibit button.) For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Correct Answer:
Explanation
No domains have been selected in the "Configure Server Discovery" option. Therefore, no automatic discovery will take place. Manual addition of a server will also fail because IPAM needs a domain configured for server verification.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: From a command prompt, you run netdom query fsmo.
Does this meet the goal?
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: From a command prompt, you run netdom query fsmo.
Does this meet the goal?
Correct Answer: B
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).