Cisco Implementing and Operating Cisco Collaboration Core Technologies - 350-801 Exam Practice Test

A. EF B. CS3 C. AF41 D. CS4

A. The NTP server is running out of space in the hard drive, which prevents the cluster service from starting. B. The NTP server for Cisco UCM must be stratum 6 or higher. C. The NTP service is pointing to the wrong publisher. D. The NTP server must be replaced by another server with NTP stratum 1, 2, or 3 running version NTPv4.

A. single sign-on between Directory Connector and Active Directory B. .NET Framework 3.4 installed on the Directory Connector server C. Active Directory with a forest functional level of 1 or higher D. TCP port 443 open from Directory Connector to the internet E. support for TLS 1.2 between Directory Connector and Webex Control Hub

A. client settings B. locations C. service settings D. call routing

A. Pattern usage, IPv4 pattern, and SIP trunk/Route list B. Pattern usage, IPv6 pattern, and SIP trunk/Route list C. Pattern usage, IPv4 pattern, IPv6 pattern, and description D. SIP trunk/Route list, description, and IPv4 pattern

A. no supplementary-service sip refer B. dtmf-relay rtp-nte C. media flow-around D. rtp-nte

A. Maximum Number of Calls increased on the line B. No Answer Ring Duration adjusted C. Busy Trigger set to zero D. Call Forward Busy destination set to the hunt pilot

A. Do not use a shared address for Expressway-E and Expressway-C, as the firewall cannot distinguish between them If static NAT for IP addressing on Expressway-E is used, ensure that any NAT operation on Expressway-C does not resolve the same traffic IP address Shared NAT is not supported. B. The traversal zone on Expressway-C points to Expressway-E through the peer address field on the traversal zone, which specifies the Expressway-E server address. For dual NIC deployments, set the Expressway-E address using an FQDN that resolves the IP address of the internal interface C. The internal firewall must allow these inbound and outbound connections between Expressway-C and Expressway-E. SIP: HTTPS (tunnelled overSSH between C and E): TCP 2222; TCP 7001; Traversal Media: UDP 2776 to 2777 (or 36000 to 36011 for large VM/appliance): XMPP: TCP
7400. D. The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS: TCP 8443: XMPP: TCP 5222; Media: UDP 36002 to 59999.

A. brings Video, audio, and web communication together to meet the collaboration needs of the modern workplace B. provides streamlined communication and collaboration for a hybrid workforce C. offers easy contact management, centralized administration, and centralized configuration management D. enables the provisioning, administration, and management of Webex services and Webex Hybrid Services

A. voice codec B. software version Of the router C. session capacity of the PVDM module D. number of protocol data units E. license types

A. Traffic shaping queues excess packets. B. Traffic shaping can be applied to outbound traffic on an interface. C. When the traffic rate equals the configured maximum rate, excess traffic is dropped. D. When the traffic rate equals the configured maximum rate, excess traffic is remarked. E. Traffic shaping can be applied to inbound traffic on an interface.

A. SUBSCRIBE calling search space B. Partition C. Feature control policy D. SIP trunk security profile. E. Calling search space

A. traffic shaping B. traffic policing C. traffic conditioning D. traffic signaling

A. Cisco UCM determines how the voice packets are classified. B. The voice packets are not trusted, and the access layer switch reclassifies the packets. C. The phone and access layer switch negotiate the classification of packets. D. The voice packets are classified by the phone, and the classification is accepted.

A. Audio calls and the audio portion of video calls are tagged with DSCP value 46.B. Configure the clusterwide QoS parameters in the Enterprise Parameter section on the Cisco UCM publisher. B. Have the option to set the DSCP values for "video calls", "audio portion of the video calls", and
"immediate video calls" separately. C. Configure the clusterwide QoS parameters in the Cisco CallManager Service Parameter section on any nodes within the Cisco UCM cluster. D. The option "DSCP for Video" sets the DSCP value for all types of video to the same value.