EMC Dell SONiC Deploy - D-SNC-DY-00 Exam Practice Test
Which two things does the no vrrp 100 address-family ipv6 command delete?
Correct Answer: B,E
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
VLAN 40 is configured in Switch A with an anycast-address of 192.168.40.254/24. The ARP neighbor suppression is enabled. Use the simulator to create a VTEP named vtep1 and assign an IP address of
10.10.10.1. Map the VNI 400 to VLAN 40.
10.10.10.1. Map the VNI 400 to VLAN 40.
Correct Answer:
see the explanation for all step by step solution with all explanation.
Explanation:
Here are the steps to create the VTEP and map the VNI to the VLAN:
* Enter Configuration Mode:
SwitchA# configure terminal
* Create VTEP Interface:
SwitchA(config)# interface vtep1
SwitchA(config-if-vtep1)# ip address 10.10.10.1/24
SwitchA(config-if-vtep1)# exit
* Map VNI 400 to VLAN 40:
SwitchA(config)# vlan 40
SwitchA(config-vlan)# vn-segment 400
SwitchA(config-vlan)# exit
* Enable ARP Neighbor Suppression:
SwitchA(config)# interface Vlan40
SwitchA(config-if-Vlan40)# ip address 192.168.40.254/24
SwitchA(config-if-Vlan40)# vxlan arp-suppression
SwitchA(config-if-Vlan40)# exit
* Save Configuration:
SwitchA# write memory
* Enter Configuration Mode:
* Begin by entering the global configuration mode to make changes to the switch configuration.
* Create VTEP Interface:
* Enter the interface configuration mode for the VTEP interface named vtep1 using interface vtep1.
* Assign the IP address 10.10.10.1/24 to the VTEP interface using the ip address command.
* Exit the interface configuration mode.
* Map VNI 400 to VLAN 40:
* Enter the VLAN configuration mode for VLAN 40 using vlan 40.
* Map the VNI 400 to VLAN 40 using the vn-segment 400 command.
* Exit the VLAN configuration mode.
* Enable ARP Neighbor Suppression:
* Enter the interface configuration mode for VLAN 40 using interface Vlan40.
* Assign the anycast IP address 192.168.40.254/24 to the VLAN interface using the ip address command.
* Enable ARP neighbor suppression using the vxlan arp-suppression command.
* Exit the interface configuration mode.
* Save Configuration:
* Save the configuration to ensure the changes persist after a reboot using the write memory command.
References:
* Dell Technologies Networking - SONiC
* Dell Enterprise SONiC Deployment Guide
These steps provide a comprehensive guide to configure a VTEP and map the VNI to VLAN 40 on Switch A, ensuring the specific requirements for IP addressing and ARP neighbor suppression are met.
Explanation:
Here are the steps to create the VTEP and map the VNI to the VLAN:
* Enter Configuration Mode:
SwitchA# configure terminal
* Create VTEP Interface:
SwitchA(config)# interface vtep1
SwitchA(config-if-vtep1)# ip address 10.10.10.1/24
SwitchA(config-if-vtep1)# exit
* Map VNI 400 to VLAN 40:
SwitchA(config)# vlan 40
SwitchA(config-vlan)# vn-segment 400
SwitchA(config-vlan)# exit
* Enable ARP Neighbor Suppression:
SwitchA(config)# interface Vlan40
SwitchA(config-if-Vlan40)# ip address 192.168.40.254/24
SwitchA(config-if-Vlan40)# vxlan arp-suppression
SwitchA(config-if-Vlan40)# exit
* Save Configuration:
SwitchA# write memory
* Enter Configuration Mode:
* Begin by entering the global configuration mode to make changes to the switch configuration.
* Create VTEP Interface:
* Enter the interface configuration mode for the VTEP interface named vtep1 using interface vtep1.
* Assign the IP address 10.10.10.1/24 to the VTEP interface using the ip address command.
* Exit the interface configuration mode.
* Map VNI 400 to VLAN 40:
* Enter the VLAN configuration mode for VLAN 40 using vlan 40.
* Map the VNI 400 to VLAN 40 using the vn-segment 400 command.
* Exit the VLAN configuration mode.
* Enable ARP Neighbor Suppression:
* Enter the interface configuration mode for VLAN 40 using interface Vlan40.
* Assign the anycast IP address 192.168.40.254/24 to the VLAN interface using the ip address command.
* Enable ARP neighbor suppression using the vxlan arp-suppression command.
* Exit the interface configuration mode.
* Save Configuration:
* Save the configuration to ensure the changes persist after a reboot using the write memory command.
References:
* Dell Technologies Networking - SONiC
* Dell Enterprise SONiC Deployment Guide
These steps provide a comprehensive guide to configure a VTEP and map the VNI to VLAN 40 on Switch A, ensuring the specific requirements for IP addressing and ARP neighbor suppression are met.
How many times must BGP be configured when running symmetric IRB with two VFRs?
Correct Answer: B
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
What are the supported modes for the QSFP28 ports on an S5248F?
Correct Answer: C
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
An administrator is installing Enterprise SONIC in ONIE from an HTTP server.
On which interface should the administrator configure the IP?
On which interface should the administrator configure the IP?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).