E20-517 Exam Training Practice Tests (EMC Symmetrix Solutions Specialist Exam for Storage Administrators)]

Question 1

What types of performance charts can one plot in the Unisphere for VMAX Performance Analyze view?

A. Diagnostic and Real Time B. Diagnostic, Historical and Trend C. Historical and Real Time D. Diagnostic, Historical and Real Time

Correct Answer: D

Question 2

Which component is optional during a Solutions Enabler installation?

A. SYMCLI_COMPONENT B. JNI_COMPONENT C. BASE_COMPONENT D. SYMRECOVER_COMPONENT

Correct Answer: B

Question 3

How should the control host be configured when using Enginuity Consistency Assist (ECA) for consistent activation of TimeFinder/Clone sessions?

A. Access to only the source devices B. A dedicated channel to the gatekeeper devices C. Access to only the target devices D. PowerPath must be installed on the host

Correct Answer: B

Question 4

Open Replicator Cold Push will be used to move data between a Symmetrix VMAX array and a third-party array. What needs to be done before creating the Open Replicator session?

A. Set the remote devices to Not Ready B. Set the control devices to Read/Write C. Set the control devices to Not Ready D. Set a device reservation on the remote devices

Correct Answer: C

Question 5

A customer intends to use TimeFinder VP Snap to create multiple replicas of their production data.
What is a requirement?

A. Production and Target devices must be thin.
Production and Target devices must be bound to the same thin pool. B. Production devices must be thin.
Target devices can be standard or thin. C. Production and Target devices must be thin.
Target devices must be bound to the same thin pool. D. Production devices can be standard or thin.

Correct Answer: C

Question 6

Which characteristics of the storage groups on Symmetrix storage arrays running Enginuity 5876 are correct?

A. Can be cascaded, FAST at child level, Masking allowed on parent only. B. Masking allowed on either child or parent, Can be cascaded, FAST at parent level. C. Can be cascaded, FAST at child level, Masking allowed on both child and parent. D. FAST at child level, Cannot be cascaded, Masking allowed on either child or parent.

Correct Answer: A

Question 7

What duration and type of performance data does a Unisphere for VMAX BTP Report contain?

A. Up to 4 hours of Diagnostic data B. Up to 4 hours of Real Time data C. Up to 24 hours of Diagnostic data D. Up to 24 hours of Historical data

Correct Answer: A

Question 8

If the default values in Unisphere for VMAX are not changed, which value will trigger a fatal alert for Device Pool Free Space?

A. 98 B. 99 C. 95 D. 100

Correct Answer: D

Question 9

The network link fails between the source and target in an SRDF Environment. Shortly thereafter the network connection is restored.
What is the RDF pair state reported by "symrdf query"?

A. Partitioned B. Not Ready C. Suspended D. Failed Over

Correct Answer: C

Question 10

A Unisphere for VMAX user must be able to see all VMAX arrays managed by the Unisphere server but should not be able to make any changes. In addition this user should not be able to view the permissions that have been set for other Unisphere for VMAX users.
Which role should be assigned to this user?

A. None B. Auditor C. Monitor D. PerfMonitor

Correct Answer: C

Question 11

What is recommended before performing a TimeFinder/Clone establish operation?

A. Clone target devices should be write disabled B. Clone source devices should not be actively accessed C. Clone source devices should be write disabled D. Clone target devices should not be actively accessed

Correct Answer: D

Question 12

Which lock(s) will be in place when a device is being swapped by Optimizer on a Symmetrix VMAX array?

A. Front-end device and back-end device locks B. Back-end device lock C. Front-end device and director locks D. Configuration lock

Correct Answer: B

Question 13

After acquiring a company 300 hundred miles from their current office, a customer has asked EMC to help design a single-hop application recovery plan. After careful analysis of the workload and available bandwidth, SRDF/AR was selected as the solution.
If the SRDF/AR cycle time is set to 60 minutes, what is the maximum potential data loss?

A. 1.5 hours of data B. 1 hours of data C. 3 hours of data D. 2 hours of data

Correct Answer: D

Question 14

What will happen if one or more source (R1) devices in an SRDF/Synchronous consistency group cannot propagate data to their corresponding target (R2) devices?

A. SRDF/S replication will be suspended and a consistent data cleanup will be performed on the R2 targets B. All RDF device pairs in the consistency group will be set to Not Ready C. Data propagation from all R1 devices in the consistency group to the R2 targets will be suspended D. Data propagation from the specific R1 devices to their corresponding R2 targets will be suspended

Correct Answer: C

Question 15

You are installing a Symmetrix VMAX storage array running Enginuity 5876. The customer has an older Symmetrix VMAX array running Enginuity 5874 and wants to update to Solutions Enabler
7.5.
What license type is required for the VMAX array running Enginuity 5874?

A. Electronic license B. Capacity-based license C. Host-based license D. SMC license

Correct Answer: C

EMC Symmetrix Solutions Specialist Exam for Storage Administrators - E20-517 Exam Practice Test