NACE-CIP2-001 Exam Training Practice Tests (NACE Coating Inspector Level 2)]

Question 1

When completing the Final Inspection report the Inspector should write the report using:

A. Language that only in the project would understand B. Language that only technical experts would understand C. Language that the most would understand D. Language that another NACE Inspector would understand

Correct Answer: C

Question 2

Ideally, documentation requirements should be defined:

A. By the inspector B. At the pre-job conference C. In the specification D. By the contractor

Correct Answer: C

Question 3

A failure caused by applying a coating too thinly is known as

A. failure to cure. B. chalking. C. pinholes. D. cracking.

Correct Answer: C

Question 4

You are the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no individual gauge reading shall be below a certain value.
As this is not part of the standard you should:

A. Ignore the additional requirement B. Request clarification from the specifier C. Enforce the additional requirement D. Call your supervisor

Correct Answer: C

Question 5

Coating surveys may include which steps?
Select All That Apply:

A. Develop a survey plan B. Evaluate the coatings performance C. Summarize the collected data D. Schedule the remedial work

Correct Answer: A,B,C,D

Question 6

The Concrete Repair Institute's comparators can be used to assess:

A. Contamination levels prior to coating B. Surface profile prior to coating C. Surface cleanliness prior to coating D. Compressive and tensile strength prior to coating

Correct Answer: B

Question 7

From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:

A. Safety B. Appearance C. Iron content D. Cost

Correct Answer: C

Question 8

Corrosion is the reverse process of

A. galvanic deterioration. B. steel manufacturing. C. flaking. D. hot dipping.

Correct Answer: B

Question 9

You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:

A. Correct the errors yourself and suggest the Level 1 inspector be replaced B. Have the Level 1 Inspector correct the errors and set up remedial training to improve the quality of documentation C. Correct the errors yourself and submit the reports without any further action D. Correct the errors yourself and advise your supervisor that the Level 1 Inspector is incompetent

Correct Answer: B

Question 10

Non-Conformance Reports are designed to:

A. To identify items that do not meet the specification requirements B. Elevate the status of the Inspector C. Punish the Contractor for substandard work D. Assist the Owner in negotiating credits from the Contractor

Correct Answer: A

NACE Coating Inspector Level 2 - NACE-CIP2-001 Exam Practice Test