2022 NS0-516 Question Bank: Free PDF Download Recently Updated Questions
NS0-516 Certification Exam Dumps with 180 Practice Test Questions
NetApp NS0-516 Exam Certification Details:
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
| Exam Registration | PEARSON VUE |
| Duration | 90 minutes |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Exam Name | Implementation Engineer SAN Specialist E-Series |
| Passing Score | 75% |
| Exam Price | $150 USD |
NEW QUESTION 23
What is the proper order to power-on E-Series arrays when a storage system has at least 2 trays? (Choose the best answer.)
- A. Power on in any order, since the order does not matter
- B. Power up A-side power supplies first, then power up all B-side power supplies.
- C. Power on the controller drive tray first, then wait several minutes for the controller drive tray to spin up, and then power on all expansion drive trays
- D. Power all expansion drive trays first, wait several minutes for the expansion drive trays to spin up, and then power on the controller drive tray
Answer: C
NEW QUESTION 24
To discover events that need to be reported to the storage administrator, which log does the Event Monitor poll?
- A. Array Profile
- B. Major Event Log
- C. Recovery Guru log
- D. ASUP log
Answer: B
NEW QUESTION 25
You have two Linux hosts that must be connected over multiple paths to two NetApp E-Series systems. One with FC and the other with SAS.
In this scenario, which mutipathing driver should you use for each system to complete this task?
- A. Use LVM for FC and SAS.
- B. Use DM-MP for FC and LVM for SAS.
- C. Use DM-MP for SAS and LVM for FC.
- D. Use DM-MP for FC and SAS.
Answer: D
NEW QUESTION 26
Identify this controller.
- A. E2700
- B. E5500
- C. E5600
- D. E5400
Answer: D
NEW QUESTION 27
What file on a Windows management host server contains information about the storage system management connections?
- A. mgmt.cfg
- B. EMWdata_vxx.bin
- C. the event log
- D. AMWcfg_vxx.bin
Answer: B
NEW QUESTION 28
What is the maximum number of FC host interface cards used per NetApp EF600 storage array?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 29
Which feature used on E-Series controllers enables them to ship I/O to the alternate controller?
- A. ALUA
- B. RDAC
- C. TPGS
- D. AVT
Answer: A
NEW QUESTION 30
When replacing failed disks, what is a consideration for replacement disks?
- A. The replacement disk must be of greater capacity to rebuild the data structure from the failed disk.
- B. The replacement disk must match the security capabilities of the existing driver.
- C. The replacement disk can be of any technology; for example, an HDD can replace an SSD.
- D. The replacement disk must have DAC store already installed on it.
Answer: B
NEW QUESTION 31
A Snapshot group contains one repository for which associated objects?
- A. Base volume files
- B. Snapshot volumes
- C. Snapshot images
- D. Consistency groups
Answer: C
NEW QUESTION 32
With ALUA support, how does the storage system handle I/Os to the non-preferred path? (Choose the best answer.)
- A. They are accepted but maintained in cache with a special change log, and only processed after 5 minutes when volume ownership may be changed.
- B. The non-owning controller takes ownership of the volume in order to handle them, then restores ownership to the original controller.
- C. They are shipped over to the owning controller to be managed, then returned through the non-preferred path after completion.
- D. They are rejected with a specific SCSI check condition.
- E. The controller handles them normally, updating both controllers' cache to maintain consistency, which is why ALUA requires cache mirroring to be enabled.
Answer: C
NEW QUESTION 33
During normal operation, a failure was detected on an E-Series hardware component. You want to determine the location of the failed component and understand the potential recovery actions.
In this scenario, which tool would you use to accomplish this task?
- A. unreadable sectors log
- B. performance monitor
- C. Recovery Guru
- D. Host Mappings tab
Answer: C
NEW QUESTION 34
The decision to use FC or iSCSI on the 5500 Controller with a 4-port 16Gb/s FC or 10Gb/s iSCSI Optical SFP+ HIC (Host Interface Card) can be ___________. (Choose the best answer.)
- A. changed at any time by SANtricity
- B. set at the factory, based on the order
- C. ignored because both can be used at the same time
- D. based upon the SFP type
Answer: D
NEW QUESTION 35
You are adding drives to an existing Dynamic Disk Pool (DDP). In this scenario, which two drive characteristics should you consider when selecting the drives? (Choose two.)
- A. if the drives have a compatible security type
- B. if the drives are from the same manufacturer
- C. if the drives have the same firmware level
- D. if the drives are the same capacity or larger
Answer: A,D
NEW QUESTION 36
What SANtricity package(s) must be installed on a Windows server when it is acting as both a data host and a storage management host?
- A. The client, agent, and utilities
- B. The client and agent
- C. The client, failover driver, and agent
- D. The client
Answer: C
NEW QUESTION 37
What measurement refers to how much data can be handled in a given time period? (Choose the best answer.)
- A. Read modify write
- B. I/O alignment
- C. IOPS
- D. Throughput
- E. Parity
Answer: D
NEW QUESTION 38
Barring a specific instruction from technical support or in the release notes, what software should be upgraded or installed first?
- A. Disk firmware
- B. Controller firmware
- C. ESM firmware
- D. SANtricity client
Answer: D
NEW QUESTION 39
Which statement most accurately describes the benefits of ALUA?
- A. It causes an immediate ownership change of a volume whenever I/O uses an alternate path to the storage system.
- B. It sets the storage system to an active-active LUN access model.
- C. It ensures that controller ownership for a volume will not change.
- D. It eliminates the need for zoning of the SAN fabric in a duplex controller configuration.
Answer: B
NEW QUESTION 40
What system file is used during the controller start-of-day sequence to determine various SCSI parameters and other host-type specific settings for an E-Series system? (Choose the best answer.)
- A. Major Event Log
- B. Unreadable Sectors Log
- C. ESM Firmware
- D. NVSRAM
Answer: D
NEW QUESTION 41
......
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Hardware | -Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features. |
| Storage Configuration | -Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups. |
| Toolbox | -Describe the tools required to design and implement an E-Series solution. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
| Documentation | -Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution. |
| Protection | -Describe how Data Assurance with media scan protects your data. - Describe SANtricity data protection features. |
| Management | -Describe the administrative tasks for managing E-Series systems with SANtricity System Manager. -Describe the management security features in SANtricity System Manager and SANtricity Unified Manager. -Describe when and how to configure and use SANtricity Unified Manager. |
| Host Side | -Describe the different host connection options for E-Series systems. -Describe how to configure hosts for multipathing. |
New NS0-516 Exam Dumps with High Passing Rate: https://www.trainingdump.com/NetworkAppliance/NS0-516-practice-exam-dumps.html
Network Appliance NS0-516 Actual Questions and Braindumps: https://drive.google.com/open?id=1NRm_c562bmoqFWFo6rvX7PDJlejRdIYf