[Aug-2021] Pass 156-816.61 Exam in First Attempt Updated156-816.61 TrainingDump Exam Question
CCMSE Dumps 156-816.61 Exam for Full Questions - Exam Study Guide
NEW QUESTION 14
If you want your customer's virtual systems to give protected hosts access to and from the internet, which of the following must be configured as a Public IP address?
- A. Default Gateway IP Address of the Virtual Switch
- B. Default Gateway IP Address of the Management Virtual System
- C. Main IP of the Virtual Switch
- D. Main IP of the Customer's Virtual System
- E. Main IP of the Management Virtual System
Answer: D
NEW QUESTION 15
The _____________ interface is configured in a VLAN environment, to allow multiple Virtual Systems to share a single physical interface on a VSX Gateway.
- A. Physical
- B. Virtual
- C. Symbolic
- D. Warp
- E. Synchronization
Answer: B
NEW QUESTION 16
What is the required to prevent loops in Virtual Systems in a Cluster XL environment?
- A. STP
- B. MPLS
- C. BPDU
- D. OSPF
- E. VRRP
Answer: A
NEW QUESTION 17
When deploying a VSX Gateway managed by SmartCenter Server, how many Certificate Authorities will the deployment have?
- A. Two; one for the SmartCenter Server and one shared by all Virtual Systems and Virtual Routers
- B. One for each Virtual System and Virtual Router and Configured on the VSX Gateway
- C. One for each Virtual System configured on the VSX Gateway
- D. One, shared by all components
- E. Three; one for the SmartCenter Server, one shared by all Virtual Systems and one shared by the Virtual Routers
Answer: D
NEW QUESTION 18
Which of the following is the only interface configured by running sysconfig, during the installation of a VSX Gateway in a single Gateway environment?
- A. Internal Virtual Router Interface
- B. Management Interface
- C. Dedicated Customer interface
- D. Synchronization interface
- E. External Interface
Answer: B
NEW QUESTION 19
At installation, the __________ is bound to all configured physical interfaces of a VSX Gateway, UNLESS the interfaces are specifically assigned to another component.
- A. External Virtual Router
- B. VSX Management Server
- C. Internal Virtual Router
- D. Synchronization Network
- E. Management Virtual System
Answer: E
NEW QUESTION 20
Which of the following VSX components maintain Layer 3 Connectivity?
- A. External Virtual Switch
- B. Internal Virtual Switch
- C. Virtual Router
- D. VLAN Interface
- E. Virtual System in Bridge Moe
Answer: C
NEW QUESTION 21
Which of the following VSX Gateway components are unique to and NOT shared by each Virtual System?
- A. VSX Management Server
- B. VSX Inspection Module
- C. Context Identification Module
- D. VSX Policy Editor
- E. Virtual Router
Answer: B
NEW QUESTION 22
Which of the following objects allows you to configure resource settings, to limit the number of concurrent connections?
- A. External Virtual Switch
- B. Internal Virtual Switch
- C. VSX Gateway
- D. Virtual Router
- E. Management Virtual System
Answer: E
NEW QUESTION 23
Which of the following elements is NOT maintained separately by each Virtual System on a VSX Gateway?
- A. Management database
- B. Configuration parameters
- C. Logging parameters
- D. Security Policies
- E. State tables
Answer: A
NEW QUESTION 24
TRUE or FALSE. A Virtual System in Bridge Mode can enforce anti-spoofing definitions.
- A. False, anti-spoofing can't be configured for Virtual systems in Bridge Mode
- B. True, anti-spoofing measures are defined automatically is Bridge mode
- C. True, anti-spoofing must be manually defined in bridge mode
- D. True, as long as Network Address Translation is performed
- E. True, as long as the Virtual System has more than two interfaces defined
Answer: C
NEW QUESTION 25
Which of the following virtual devices will NOT fail over, if its interface fails in a VSX High Availability configuration?
- A. External Virtual Router
- B. Virtual System with dedicated interfaces
- C. Virtual Switch
- D. Management Virtual System Interfaces
- E. Virtual System with VLAN Interfaces
Answer: C
NEW QUESTION 26
Which of the following is NOT maintained separately by each Virtual System on a VSX Gateway?
- A. Management database
- B. Configuration parameters
- C. Security Policies
- D. State tables
- E. Logging Parameters
Answer: A
NEW QUESTION 27
Consider the following scenario: Your Network configuration requires that you configure a single interfaces on the VSX Gateway to lead to multiple networks. A different Virtual System must protect each network sending traffic through the VSX Gateway. You configured a dedicated management interface on the VSX Gateway, along with 1 External Virtual Router and 4 Virtual Systems one for each Customer. Which of the following hardware devices must be used to connect the different networks to the single shared interface?
- A. Router
- B. VLAN-capable switch
- C. Content-intelligent switch
- D. Frame cache-redirection enabled switch
- E. Jumbo Frame-enabled switch
Answer: B
NEW QUESTION 28
Which of the following statements is true concerning the default Security Policy of the External Virtual Router?
- A. All traffic coming from networks protected by a VSX Gateway is accepted. All other traffic is dropped
- B. The default policy of the External Virtual Router Denies all traffic going to or coming from it
- C. The External Virtual Router automatically performs Hide NAT behind external interface for all Virtual Systems connected to it
- D. The External Virtual Router always enforces the same policy as the Management Virtual System
- E. The default policy of the External Virtual Router can't be changed
Answer: B
NEW QUESTION 29
When Virtual systems are deployed in Bridge mode, they use _________ to detect failures and forward traffic to another Virtual System in a cluster?
- A. STP
- B. MPLS
- C. PBDU
- D. OSPF
- E. VRRP
Answer: A
NEW QUESTION 30
The ____________ interface is configured in a VLAN environment, to allow multiple Virtual systems to share a single physical interface on a VSX Gateway.
- A. Physical
- B. Virtual
- C. Symbolic
- D. Warp
- E. Synchronization
Answer: B
NEW QUESTION 31
When configuration a new Virtual System for your VSX Gateway configuration, what should you do first?
- A. Add a new Virtual System to the Main Customer, so that the Admin CMA can be used as the Management Server
- B. Create a new customer and CMA, to be used as the Virtual System's Management Server
- C. Open the Admin CMA SmartDashboard and create a new Virtual System Object
- D. Open the Global SmartDashboard and create a new Virtual System Object
- E. Open the Admin CMA SmartDashboard and create a new CMA object to be used as the Virtual System's Management Server
Answer: B
NEW QUESTION 32
When configuring _________, the interface leading to the External Virtual Router should be set as the main IP Address and should be publicly routable.
- A. Network Address Translation
- B. Anti-spoofing
- C. A Virtual Switch
- D. Virtual Systems in Bridge mode
- E. VLAN Trunking Interfaces
Answer: A
NEW QUESTION 33
Bridged Virtual Systems in a cluster monitor which of the following protocols, to fail over a bridged system?
- A. VTP
- B. MPLS
- C. BPDU
- D. OSPF
- E. STP
Answer: C
NEW QUESTION 34
A Warp Link is a virtual point-to-point connection between a:
- A. Virtual System and another Virtual System
- B. Virtual Router and a physical interface
- C. Virtual Router and Virtual System
- D. Virtual Router and Virtual Switch
- E. Virtual System and the management interface
Answer: C
NEW QUESTION 35
Which of the following commands should you run to stop a VSX Gateway Cluster?
- A. vsxstop
- B. vsx cpstop
- C. cpstop
- D. cphastop
- E. vsxhastop
Answer: C
NEW QUESTION 36
......
Authentic Best resources for 156-816.61 Online Practice Exam: https://www.trainingdump.com/CheckPoint/156-816.61-practice-exam-dumps.html