Best Preparations of JN0-636 Exam 2023 JNCIP-SEC Unlimited 140 Questions
Focus on JN0-636 All-in-One Exam Guide For Quick Preparation.
Juniper JN0-636 exam is designed to test the knowledge and skills required to design, implement, and manage security solutions using Juniper Networks security products. JN0-636 exam covers topics such as intrusion prevention, firewall policies, VPNs, security policies, and unified threat management. JN0-636 exam also tests candidates' ability to troubleshoot and maintain Juniper Networks security products.
NEW QUESTION # 60
You want to route traffic between two newly created virtual routers without the use of logical systems using the configuration options on the SRX5800.
Which two methods of forwarding, between virtual routers, would you recommend? (Choose two.)
- A. Connect a direct cable between boo physical interfaces, one in each virtual router and use static routes with thenext-hopcommand.
- B. Create static routes in each virtual router using thenext-tablecommand.
- C. Use a RIB group to share the internal routing protocol routes from the master routing instance.
- D. Use a static route to forward traffic across virtual routers using the next-table option.
Enable the return route by using a RIB group.
Answer: A,B
NEW QUESTION # 61
You are asked to look at a configuration that is designed to take all traffic with a specific source ip address and forward the traffic to a traffic analysis server for further evaluation. The configuration is no longer working as intended.
Referring to the exhibit which change must be made to correct the configuration?
- A. Apply the filter as in input filter on interface xe-0/2/1.0
- B. Create a routing instance named default
- C. Apply the filter as in input filter on interface xe-0/0/1.0
- D. Apply the filter as in output filter on interface xe-0/1/0.0
Answer: C
NEW QUESTION # 62
Click the Exhibit button.
While configuring the SRX345, you review the MACsec connection between devices and note that it is not working.
Referring to the exhibit, which action would you use to identify problem?
- A. Verify that the transmission path is not replicating packets or correcting frame check sequence error packets
- B. Verify that the interface between the two devices is up and not experiencing errors
- C. Verify that the connectivity association key and the connectivity association key name match on both devices
- D. Verify that the formatting settings are correct between the devices and that the software supports the version of MACsec in use
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/show- security-mka-statistics.html
NEW QUESTION # 63
Which three type of peer devices are supported for Cos-Based IPsec VPN?
- A. Branch-end SRX Series devics
- B. cSRX
- C. High-end SRX Series device
- D. vSRX
Answer: A,C,D
NEW QUESTION # 64
Exhibit
You are using traceoptions to verity NAT session information on your SRX Series device Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This packet is part of an existing session.
- B. The SRX device is changing the source address on this packet from
- C. This is the first packet in the session
- D. The SRX device is changing the destination address on this packet 10.0.1 1 to 172 20.101.10.
Answer: C,D
NEW QUESTION # 65
Exhibit
You have recently configured Adaptive Threat Profiling and notice 20 IP address entries in the monitoring section of the Juniper ATP Cloud portal that do not match the number of entries locally on the SRX Series device, as shown in the exhibit.
What is the correct action to solve this problem on the SRX device?
- A. You must configure the DAE in a security policy on the SRX device.
- B. Refresh the feed in ATP Cloud.
- C. Flush the DNS cache on the SRX device.
- D. Force a manual download of the Proxy__Nodes feed.
Answer: C
NEW QUESTION # 66
You have noticed a high number of TCP-based attacks directed toward your primary edge device. You are asked to configure the IDP feature on your SRX Series device to block this attack.
Which two IDP attack objects would you configure to solve this problem? (Choose two.)
- A. host
- B. Signature
- C. Network
- D. Protocol anomaly
Answer: B,D
NEW QUESTION # 67
Your organization has multiple Active Directory domains to control user access. You must ensure that security policies are passing traffic based upon the users' access rights.
What would you use to assist your SRX Series devices to accomplish this task?
- A. Junos Space
- B. JSA
- C. JIMS
- D. JATP Appliance
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth- intergrated-user-firewall-overview.html
NEW QUESTION # 68
A local user complains that they cannot connect to an FTP server on the DMZ network.
You investigate and confirm that the security policy allows FTP traffic from the trust zone to the DMZ zone.
What are two reasons for this problem? (Choose two.)
- A. The FTP ALG is disabled.
- B. No route is configured to the DMZ network.
- C. No security policy exists for traffic from the DMZ zone to the trust zone.
- D. The FTP server has no route back to the local network.
Answer: A,D
NEW QUESTION # 69
You are asked to provide single sign-on (SSO) to Juniper ATP Cloud. Which two steps accomplish this goal?
(Choose two.)
- A. Configure Juniper ATP Cloud as the identity provider (IdP).
- B. Configure Juniper ATP Cloud as the service provider (SP).
- C. Configure Microsoft Azure as the service provider (SP).
- D. Configure Microsoft Azure as the identity provider (IdP).
Answer: C,D
NEW QUESTION # 70
Which two additional configuration actions are necessary for the third-party feed shown in the exhibit to work properly? (Choose two.)
- A. You must create a dynamic address entry with the C&C category and the cc_offic365 value.
- B. You must apply the dynamic address entry in a security policy.
- C. You must create a dynamic address entry with the IP filter category and the ipfilter_office365 value.
- D. You must apply the dynamic address entry in a security intelligence policy.
Answer: B,C
NEW QUESTION # 71
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The SRX-1 device can use the Proxy__Nodes feed in another security policy.
- B. You can only use the Proxy_Node3 feed as the destination-address match criteria of another security policy on a different SRX Series device.
- C. You can use the Proxy_Nodes feed as the source-address and destination-address match criteria of another security policy on a different SRX Series device.
- D. The SRX-1 device creates the Proxy_wodes feed, so it cannot use it in another security policy.
Answer: A,D
NEW QUESTION # 72
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The local gateway address for the IPsec tunnel is 10.20.20.2
- B. The session information indicates that the IPsec tunnel has not been established
- C. The remote gateway address for the IPsec tunnel is 10.20.20.2
- D. NAT is being used to change the source address of outgoing packets
Answer: C
NEW QUESTION # 73
You have set up Security Director with Policy Enforcer and have configured 12 third-party feeds and a Sky ATP feed. You are also injecting 16 feeds using the available open API. You want to add another compatible feed using the available open API, but Policy Enforcer is not receiving the new feed.
What is the problem in this scenario?
- A. You have reached the maximum limit of 29 total feeds
- B. You must wait 48 hours for the feed to update
- C. You cannot add more than 16 feeds with the available open API
- D. You cannot add more than 16 feeds through the available open API
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/sky-atp/information- products/pathway-pages/sky-atp-admin-guide.pdf page 110
NEW QUESTION # 74
You must ensure that your Layer 2 traffic is secured on your SRX Series device in transparent mode.
What must be considered when accomplishing this task?
- A. You must reboot your device after configuring transparent mode.
- B. Layer 2 interfaces must use theethernet-switchingprotocol family.
- C. Security policies are not supported when operating in transparent mode.
- D. Screens are not supported in your security zones with transparent mode.
Answer: A
NEW QUESTION # 75
Your company wants to use the Juniper Seclntel feeds to block access to known command and control servers, but they do not want to use Security Director to manage the feeds.
Which two Juniper devices work in this situation? (Choose two)
- A. EX Series devices
- B. SRX Series devices
- C. MX Series devices
- D. QFX Series devices
Answer: D
NEW QUESTION # 76
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Data is transmitted across the link in plaintext
- B. The link is not protected against man-in-the-middle attacks
- C. The link is protected against man-in-the-middle attacks
- D. Data is transmitted across the link in cyphertext
Answer: B,D
NEW QUESTION # 77
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 78
Exhibit
Which statement is true about the output shown in the exhibit?
- A. The SRX Series device is configured to disable IPv6 packet forwarding.
- B. The SRX Series device is configured with packet-based IPv6 forwarding options.
- C. The SRX Series device is configured with flow-based IPv6 forwarding options.
- D. The SRX Series device is configured with default security forwarding options.
Answer: D
NEW QUESTION # 79
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The SRX-1 device can use the Proxy__Nodes feed in another security policy.
- B. You can only use the Proxy_Node3 feed as the destination-address match criteria of another security policy on a different SRX Series device.
- C. You can use the Proxy_Nodes feed as the source-address and destination-address match criteria of another security policy on a different SRX Series device.
- D. The SRX-1 device creates the Proxy_wodes feed, so it cannot use it in another security policy.
Answer: A,D
NEW QUESTION # 80
Exhibit
You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit.
The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?
- A. You must apply the firewall filter to the lo0 interface when using filter-based forwarding.
- B. You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.
- C. You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.
- D. You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.
Answer: C
NEW QUESTION # 81
Which Junos security feature is used for signature-based attack prevention?
- A. AppQoS
- B. PIM
- C. IPS
- D. RADIUS
Answer: C
NEW QUESTION # 82
......
Juniper JN0-636 (Security, Professional (JNCIP-SEC)) Exam is a certification exam that is designed to validate the skills and knowledge of security professionals in the Juniper Networks security solutions. Security, Professional (JNCIP-SEC) certification is intended for individuals who have advanced knowledge and experience in configuring, implementing, and troubleshooting Juniper Networks security products and solutions. The JN0-636 exam is the next level certification after the JNCIS-SEC certification.
Guaranteed Success with JN0-636 Dumps: https://www.trainingdump.com/Juniper/JN0-636-practice-exam-dumps.html
Pass Juniper JN0-636 Exam – Experts Are Here To Help You: https://drive.google.com/open?id=1iYIQLx1_qaeSxihZBwdqOz7dyBT34cd5