Cisco 300-625 Real 2022 Braindumps Mock Exam Dumps
300-625 Exam Questions | Real 300-625 Practice Dumps
2. Use Study Guides
At the same time, many people prefer to use additional materials such as books and study guides to supplement the courses. These are some of the valuable options to consider:
- How I Passed Implementing Cisco Storage Area Networking Exam written by Rocismo Liolentz Publications – This is a comprehensive guide designed to prepare every candidate for Cisco 300-625. Based on the experience of the previous test takers, the authors thoroughly explain how to register for the test, how to effectively plan time, what are the topics to pay attention to, and as a result, how to get the highest score and become a Cisco certified specialist.
- Cisco Storage Networking Cookbook: NX-OS release 5.2 MDS & Nexus Families of Switches written by Venkat Kirishnamurthyi & Seth Mason – This study guide is aimed at giving you a solid understanding of Cisco storage networking configuration. This is a valuable tool that will allow even a novice to work with the MDS infrastructure and configure Fibre Channel ports. Among others, this edition covers the 300-625 exam topics, such as the implementation of FCoE and VSANs alongside the configuration and management of DCNM and inter-VSAN routing;
NEW QUESTION 38
Refer to the exhibit.
A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?
- A. The fabric is locked by admin on another switch.
- B. The switch has a conflicting domain ID.
- C. The fabric is locked by admin on switch-2.
- D. Hard zoning is enabled.
- E. Merge control is disabled.
Answer: C
NEW QUESTION 39
Refer to the exhibit. A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch.
Which action is required for the configuration to give permission to the new colleague?
- A. permit vsan 1-1000 must be configured as rule 1.
- B. permit vsan 1-1000 must be configured under the VSAN policy deny.
- C. permit vsan 1-1000 must be configured under the VSAN policy allow.
- D. permit vsan 1-1000 must be configured as rule 5.
Answer: B
NEW QUESTION 40
Refer to the exhibit. A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives several log messages. Which set of actions resolve the problem while least affecting service?
- A. 1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 vsan 10 command.
2. Activate the zone set Zoneset10-A. - B. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A. - C. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range. - D. 1. Deactivate zone set Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.
Answer: B
NEW QUESTION 41
Refer to the exhibit. Device alias information must be merged for two fabrics.
Which setting must match on both fabrics before the merge can be performed successfully?
- A. smart-zoning
- B. qos
- C. session
- D. device-alias mode
Answer: D
NEW QUESTION 42
A storage network engineer must configure a 48-port Cisco MDS switch to reject any login requests to VSAN
10 from unauthorized Fibre Channel devices and switches. All the devices that were already logged in to the switch from this VSAN must be allowed without any manual configuration. Which configuration must be applied?
- A. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 no auto-learn - B. switch(config)# port-security activate vsan 10
- C. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 - D. switch(config)# feature port-security
switch(config)# port-security database vsan 10
switch(config-port-security)# any-wwn interface fc1/1 - fc1/48
Answer: B
NEW QUESTION 43
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?
- A. virtual domains
- B. IVR NAT
- C. auto topology
- D. transit VSANs
Answer: B
NEW QUESTION 44
A storage network engineer is implementing SAN telemetry for a SAN infrastructure using Cisco DCNM for SAN. Which command is used to check the session status for telemetry operation?
- A. show telemetry transport
- B. show telemetry pipeline stats
- C. show analytics system-load
- D. show telemetry control stats
Answer: A
Explanation:
Section: Management and Monitoring
NEW QUESTION 45
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDS. Which feature must be configured to ensure continued operation?
- A. virtual domains
- B. lVR NAT
- C. auto topology
- D. transit VSANs
Answer: B
NEW QUESTION 46
Refer to the exhibit.
Refer to the exhibit. Device alias information must be merged for two fabrics. Which setting must match on both fabrics before the merge can be performed successfully?
- A. smart-zoning
- B. device-alias mode
- C. session
- D. qos
Answer: D
NEW QUESTION 47
Drag and drop the DCNM configuration tasks from the left onto the correct tools on the right.
Answer:
Explanation:
NEW QUESTION 48
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. The same alias must be used in zoning as well as DPVM
- B. All aliases being used are being configured in the same VSAN
- C. Aliases must be saved within a central database on the fabric
- D. The zone database must be distributed over the fabric
Answer: A
NEW QUESTION 49
Which two platforms support the FCoE protocol? (Choose two)
- A. Cisco Nexus 7010 Series
- B. Cisco MDS 9148S Series
- C. Cisco MDS 9222i Series
- D. Cisco Nexus 2248TP Series
- E. Cisco Nexus 2332TQ Series
Answer: A,E
NEW QUESTION 50
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0x8914
- B. 0x8906
- C. 0xxfc0e
- D. 0x8913
Answer: A
NEW QUESTION 51
Which two steps are mutual between Cisco secure boot and UEFI secure boot? (Choose two.)
- A. operating system
- B. kemel
- C. hardware anchor
- D. microloader
- E. bootloader
Answer: A,E
NEW QUESTION 52
A storage engineer is troubleshooting a Cisco MDS switch upgrade issue. What prevents the completion of a non-d.sruptive upgrade?
- A. The Cisco Fabric Services operation in progress.
- B. The Fibre Channel storage target is connected.
- C. The Fibre Channel host initiator is connected.
- D. The Fibre Channel and FCoE storage targets are connected.
Answer: C
NEW QUESTION 53
The principal switch on a Fibre Channel network fails to assign requested domain to a subordinate switch.
What are two reasons? (Choose two.)
- A. An existing switch already has the requested domain assigned.
- B. The fabric is locked.
- C. The requested domain is outside the allowed list.
- D. The persistent FC ID feature is not enabled.
- E. Cisco Fabric Services distribution is not enabled on the switch.
Answer: A,C
NEW QUESTION 54
Which two steps are mutual between Cisco secure boot and UEFI secure boot? (Choose two.)
- A. operating system
- B. hardware anchor
- C. microloader
- D. bootloader
- E. kernel
Answer: A,D
NEW QUESTION 55
......
Verified 300-625 Exam Dumps Q&As - Provide 300-625 with Correct Answers: https://www.trainingdump.com/Cisco/300-625-practice-exam-dumps.html