Updated 1Z0-1066-26 Dumps PDF - 1Z0-1066-26 Real Valid Brain Dumps With 141 Questions!
100% Free 1Z0-1066-26 Exam Dumps Use Real Oracle Cloud Dumps
NEW QUESTION # 74
Cost accounting captures costed transactions that are picked up by the cost processor. Which is not picked up by the cost processor?
- A. invoices and revenue interfaced from Cloud Receivables
- B. period close adjusting journal entries for Payroll
- C. shipping, receiving, and inventory transactions from manufacturing
- D. supplier invoices interfaced from Cloud Payables
Answer: A
NEW QUESTION # 75
Which is the correct sequence of possible solutions that a constrained plan might consider when attempting to resolve a capacity or resource overload?
- A. First alternate item structures, and work definitions, then substitute components, then alternate resources, and finally, alternate suppliers and source organizations.
- B. First subscribe components, then alternate resources, then alternate work definitions and item structures, and finally, alternate suppliers and source organizations.
- C. First alternate suppliers, then alternate resources, then substitute components, then alternate work definitions and item structures, and finally, alternate source organizations.
- D. First alternate resources, then substitute components, then alternate work definitions and item structures, and finally, alternate suppliers and source organizations.
Answer: D
NEW QUESTION # 76
Which three statements are NOT correct regarding Manage Product Launch?
- A. It must be accessed from the actions menu of a table with items.
- B. It can be used for brand new or existing items.
- C. It requires a historical measure to be specified.
- D. It creates the specified new combinations during the next plan run.
Answer: A,C,D
NEW QUESTION # 77
Your client has a requirement to restrict Supply Plan data access. Identify three Data Access Set detail entities that can be used to restrict plan data access. (Choose three.)
- A. Material Planner
- B. Demand Class
- C. Supplier
- D. Item
- E. Transaction Type
- F. Customer
Answer: C,D,F
Explanation:
NEW QUESTION # 78
Which statement is correct regarding S&OP plan options?
- A. Supply Planning Mode 'aggregated' can be turned off.
- B. Forecasting profile's input demand measure can only be set to 'consensus forecast' or 'approved consensus forecast'.
- C. Calculating Safety Stock can optionally be included.
- D. Lead time compression can optionally be included as a legitimate plan constraint.
Answer: D
NEW QUESTION # 79
A planner needs to adjust the schedule for a particular planned order.
- A. Open the Supplies and Demands table, select the row of the required planned order, drill to the Build Plan, and edit the firm date.
- B. Open the Supplies and Demands table, select the row of the required planned order, and edit its firm date.
- C. Open the Supplies and Demands table, select the row of the required planned order, and edit its suggested due date.
- D. Open the Supplies and Demands table, select the row of the required planned order, launch View Calendar Details from the actions menu, and drag the planned order to the new date.
Answer: A,C
NEW QUESTION # 80
You ran a demand plan with the data refresh option "Do not refresh with current data." Identify two true statements. (Choose two.)
- A. Forecasting engine will run without advancing the plan date.
- B. Shipments history data will be updated.
- C. Forecasting engine will not run.
- D. Shipments forecast data will not be modified.
- E. Shipments history data will not be modified.
Answer: A,E
NEW QUESTION # 81
When planning for customer demand to be fulfilled from internal organizations or from a contract manufacturer, what are the four types of planned orders that can be generated? (Choose four.)
- A. Transfer orders for internally owned components being transferred from contract manufacturer to internal organizations.
- B. Transfer orders for finished goods being transferred from contract manufacturer organizations to internal organizations.
- C. Return orders for items being manufactured in the contract manufacturer organization.
- D. Make orders for items being manufactured in the contract manufacturer organization.
- E. Transfer orders for internally owned components being transferred from internal organizations to contract manufacturer organizations.
- F. Buy orders for components purchased at internal organizations and contract manufacturer organizations.
Answer: B,D,E,F
Explanation:
NEW QUESTION # 82
Which statement is NOT true about Collect Planning Data?
- A. Net Change collection does not collect Shipment and Booking history data.
- B. During a Targeted collection for a specific business object, the existing data is first purged from the planning data repository.
- C. If only a few business objects are selected for collection, their data dependencies are not automatically included in the data collection.
- D. If you use a predefined template, you can't change the business objects being collected, but you can change the Collection Type.
Answer: D
NEW QUESTION # 83
Your client manufactures consumer electronics and has all facilities live on Oracle Cloud. Their latest product has a very complicated manufacturing process and therefore can only be made at one facility (Organization ABC). However, it is ordered all over the world.
How should the Sourcing Rule be set up to accomplish this?
- A. A global sourcing rule for 100% make at ABC; a local sourcing rule for 100% transfer from ABC
- B. A local sourcing rule for 100% make at ABC; a global sourcing rule for 100% buy from ABC
- C. A local sourcing rule for 100% buy from ABC; a global sourcing rule for 100% transfer from ABC
- D. A local sourcing rule for 100% make at ABC; a global sourcing rule for 100% transfer from ABC
- E. A global sourcing rule for 50% make at ABC and 50% buy from ABC
Answer: C
NEW QUESTION # 84
Which two statements regarding the Decomposition scheduled process are incorrect? (Choose two.)
- A. It reads published planning data from interface tables.
- B. It does not recognize forecast exceptions.
- C. It creates or updates an order forecast, used by Supply Chain Collaboration to publish to suppliers.
- D. It received supplier commits.
Answer: B,D
NEW QUESTION # 85
When running the Publish Order Forecast scheduled process, what is the minimum set of parameters needed to publish additional measures such as requisition and purchase order data?
- A. Include requisitions in the order forecast, "Include purchase orders in the order forecast", and "Publish purchasing details"
- B. Include requisitions in the order forecast, "Include purchase orders in the order forecast", and "Publish order details"
- C. Include purchase orders in the order forecast
- D. Publish order details
Answer: B
Explanation:
To include requisition and purchase order data in the forecast, you need to select parameters for both requisitions and purchase orders, along with the option to publish order details. This ensures that all relevant order data is communicated to suppliers through the forecast, as detailed in Oracle's guidelines for publishing order forecasts
.
NEW QUESTION # 86
Which two statements are true about the seeded (predefined) Contract Manufacturing roles? (Choose two.)
- A. Users with the Supply Chain Operations Manager role need access to the Supplier Portal to see their updates and what's in progress.
- B. Users with the Supply Chain Operations Manager role can access the Supply Chain Collaboration work area.
- C. Users with the Contract Manufacturer role can access the Supplier Portal to upload their production updates.
- D. Users with the Supplier Inventory Manager role can access the Supplier Portal.
- E. Users with the Supplier Inventory Manager role don't need access to the Supplier Portal because they already have access to the Supply Chain Collaboration work area.
Answer: B,D
NEW QUESTION # 87
XYZ Company ships products globally. A warehouse in each country ships to customers in that country. When supplies are short, XYZ's constrained plan invokes an upgrade policy wherein they ship a higher value product instead of the customer's originally requested item. Although costly for XYZ, this upgrade helps maintain high customer satisfaction and on-time delivery. However, because of local preferences for some new products, this global upgrade policy no longer applies.
What is the solution?
- A. XYZ should keep the "end-item substitution" Decision Rule enabled and then just undo the substitutions where inappropriate.
- B. XYZ should create local substitution rules in Product Information Management.
- C. XYZ should enable the "local end-item substitution" Decision Rule.
- D. XYZ should disable the "end-item substitution" Decision Rule and then handle substitutions manually.
Answer: B
Explanation:
To manage the changing customer preferences for local products, creating specific substitution rules in Product Information Management (PIM) allows XYZ to customize substitutions at the local level rather than relying on a global substitution policy. This flexibility enables the company to align its policies with regional preferences, enhancing customer satisfaction while controlling costs MY ORACLE SUPPORT
.
NEW QUESTION # 88
It is now January 2023. Your customer has loaded 3 years worth of shipment history (for 1/1/20 through 12/31/22) and wants to generate a monthly forecast for 2023 based on two years of shipment history.
When creating a demand plan, which two plan scope and demand plan options should your customer use? (Choose two.)
- A. For demand plan option, add forecast shipments as forecasting profile, enter history start date as 1/1/21. enter history end date as 12/31/22. and enter forecast start date as 1/1/23.
- B. For plan scope, select plan horizon as 12 months, forecasting calendar as Gregorian, and forecasting time level as month.
- C. For demand plan option, add forecast shipments as forecasting profile, enter historical buckets as 24. and enter forecast buckets as 12.
- D. For demand plan option, add forecast shipments as forecasting profile, and enter historical buckets as 24.
- E. For demand plan option, add forecast shipments as forecasting profile, enter history start date as 1/1/21. forecast start date as 1/1/23. and enter forecast end date as 12/31/23.
- F. For plan scope, select plan horizon days as 365. forecasting calendar as Gregorian, and forecasting time level as month.
Answer: B,C
NEW QUESTION # 89
You are viewing a drop shipment plan for your organization and you want to know which customer the purchase order will be shipped to. Where can you see that?
- A. It is not viewable at this time.
- B. You need to first drill down to the sales order from the supply-demand link, then open the sales order to get the customer.
- C. It is visible in the drop ship analytics.
- D. You can see the customer on the supply in Supplies and Demand.
- E. You can see the supplier on the sales order, but not vice-versa.
Answer: B
NEW QUESTION # 90
Which statement fully describes the contents and purpose of the Product Lifecycle Management (PLM) page layout?
- A. The PLM layout has one table to define and manage discontinuation dates, and another table for entering forecast percent changes.
- B. The PLM layout has a single table to define and manage launch dates, and also enter any forecast adjustments.
- C. The PLM layout has one table to define and manage launch and discontinuation dates, and another for entering forecast adjustments.
- D. The PLM layout has two tables: one to define and manage launch dates for new products, and another for entering forecast adjustments.
Answer: C
Explanation:
The Product Lifecycle Management (PLM) layout consists of two tables: one to manage product launch and discontinuation dates and another to adjust forecasts accordingly. This structure supports managing the entire product lifecycle, as outlined in Oracle's documentation on PLM processes in supply chain planning
NEW QUESTION # 91
Demand is high leading up to the Christmas holiday every year between Dec 20 and Dec 24 and not on Christmas day (Dec 25). Your customer has two demand plans. Describe the steps to model Christmas causal factor in both demand plans.
- A. Open a demand plan and add a new customer specific Christmas causal factor. Create a table displaying the causal factor measure and relevant time period and modify as required. Causal factor changes in this demand plan will reflect in the 2nd demand plan also.
- B. Use FBDI to create a new customer specific Christmas causal factor. Place value of 1 from Dec 20 to Dec 24. Causal factor changes are plan specific, so repeat the steps in the 2nd demand plan.
- C. Open a demand plan and add a new customer specific Christmas causal factor. Create a table displaying the causal factor measure and relevant time period and modify as required. Causal factor changes are plan specific, so repeat the steps in the 2nd demand plan.
- D. Open a demand plan and edit Christmas casual factor measure. Place value of one from Dec 20 to Dec 24 and zero for non-impacted days including Dec 25. Causal factor changes are plan specific, so repeat the steps in the 2nd demand plan.
- E. Open a demand plan and edit Christmas casual factor measure. Place value of one from Dec 20 to Dec 24 and zero for non-impacted days including Dec 25. Causal factor changes in this demand plan will reflect in the 2nd demand plan also.
- F. Use FBDI to create a new customer specific Christmas causal factor. Place value of 1 from Dec 20 to Dec 34. Causal factor upload to one demand plan will reflect in the 2nd demand plan also.
Answer: A
Explanation:
NEW QUESTION # 92
You have executed Planning Data Collection and want to confirm that data has successfully been collected. Identify the three data combinations that can be viewed using the Maintain Supply Network Model Page. (Choose three.)
- A. Calendar and Master Organization
- B. Supplier Site and Service Level
- C. Sales Channel and Demand Class
- D. Safety Stock and Subinventories
- E. Customer Location and Carriers
Answer: A,B,E
NEW QUESTION # 93
Your customer has seasonal demand and wants to generate forecast for next six months. You ran a demand plan for first time using six months of shipments history but the forecast accuracy was low.
Identify two statements that are true in this scenario. (Choose two.)
- A. Running a demand plan with both shipments and booking forecast profile is required to forecast seasonal demand.
- B. Running a demand plan with six months of booking history instead of six months of shipment history is required for seasonal demand.
- C. Running a demand plan with 18 to 36 months of shipments history is recommended.
- D. Running a demand plan with both shipments and seasonal shipments forecast profile is required to forecast seasonal demand.
- E. Running a demand plan with less than one year of history will impact seasonal analysis.
Answer: B,C
NEW QUESTION # 94
In which situation would Bills of Distribution be more effective than Sourcing Rules?
- A. When all organizations transfer 50% of the material from Organization B, and 50% from Organization C
- B. When Organization A buys from a Supplier; Organization B transfers from Organization A, and Organization C transfers from Organization B
- C. When all organizations are buying from a single outside supplier
- D. When Organization A, Organization B, and Organization C transfer from Organization C
- E. When Organization A, Organization B, and Organization C make their own products
Answer: B
NEW QUESTION # 95
How does the Demand Fulfillment view prioritize at-risk demands?
- A. Based on the number of associated recommendations required to make the demand no longer at risk
- B. Based on the order value per customer weighted by the number of associated recommendations required to make the demand no longer at risk
- C. Based on order value weighted by the number of compression days required to make the demand no longer at risk
- D. Based on order value weighted by the number of associated recommendations required to make the demand no longer at risk
Answer: D
NEW QUESTION # 96
......
Pass Your 1Z0-1066-26 Exam Easily With 100% Exam Passing Guarantee: https://www.trainingdump.com/Oracle/1Z0-1066-26-practice-exam-dumps.html