SAP C_TS414_2021 Exam Prep Guide: Prep guide for the C_TS414_2021 Exam
2024 New Preparation Guide of SAP C_TS414_2021 Exam
SAP C-TS414-2021 certification is a valuable credential for professionals who are looking to enhance their career prospects in the field of SAP S/4HANA Quality Management. Certified Application Associate - SAP S/4HANA Quality Management certification validates the candidate's knowledge and skills in SAP S/4HANA Quality Management, which is a critical component of any organization's operations. Certified Application Associate - SAP S/4HANA Quality Management certification is recognized globally and provides professionals with the credibility and recognition they need to advance their careers in the field of SAP S/4HANA Quality Management.
The C-TS414-2021 exam is intended for professionals who work with SAP S/4HANA Quality Management on a daily basis, such as consultants, project managers, and quality assurance experts. C_TS414_2021 exam is an excellent way to demonstrate your expertise in SAP S/4HANA Quality Management and to validate your skills to potential employers.
NEW QUESTION # 25
Your consumer wants to perform an inspection at the vender's site instead of performing one during goods receipt.....
Where must you change the settings in the system?
- A. Purchase order
- B. Quality info record in procurement
- C. Vendor master
- D. Material master
Answer: B
NEW QUESTION # 26
What are the prerequisites for automatic creation of an inspection lot when your customer returns goods? Note : 2 correct answer
- A. \/ O Qm is active in relevant movement type
- B. Qm is active in Quality info record
- C. O Qm is active in customer master
- D. V HZ! The relevant inspection type is active in the material
Answer: A,D
NEW QUESTION # 27
The quality inspector records defects in results recording for a material inspection. When creating notification the system determines the catalog profile by consulting objects in which of following sequences?
- A. Material - Notification Type - report type
- B. Notification Type - report type - Material
- C. report type - Notification Type - Material
- D. report type - Material - Notification Type
Answer: A
NEW QUESTION # 28
By integrating the QM component in the production process, you can monitor and document process capability and the quality of products.
Which statistical and graphical tools does SAP provide to monitor a process ?
- A. Quality management inspection data interface QM-ID
- B. Quality management information system
- C. Statistical process controls (SPC)
- D. Statistical report charts
Answer: C
NEW QUESTION # 29
A buyer creates a purchase order for a material for which QM in procurement is active What does the system verify when a target QM system is assigned to the material master? Note : 3 Correct answer
- A. The purchasing info record
- B. "The vendor master
- C. The defined assignments for QM systems in the implementation Guide (IMG)
- D. The QM quality info record
- E. The inspection type
Answer: B,C,D
NEW QUESTION # 30
Which automatic interface does the system use to record results during production with notification
- A. Quality management -impaction data interface (QM-IDI)
- B. Quality management =- statistical interface (QM-ST)
- C. Quality management information system (QMIS)
- D. Process industry - process control system (PI-PCS)
Answer: A
NEW QUESTION # 31
Which object must combined in test scheduling in the stability study Correct 3
- A. Physical drawing procedure
- B. Strategy
- C. Physical samples
- D. Inspection plans
- E. Initial sample
Answer: B,C,D
NEW QUESTION # 32
From which tables does quality management information system (QMIS) retrieve data?
- A. Info structure
- B. Early warning processes
- C. Structure figures
- D. Control charts
Answer: A
NEW QUESTION # 33
Which inspection origin creates only unplanned physical samples?
- A. 2 goods issue
- B. 16 stability study
- C. 15 sample management
- D. 3 production
Answer: C
NEW QUESTION # 34
Your costumer wants to determine a critical defect class
Which of the following function are possible during results recoding?
Correct 2 ans
- A. Trigger a subsequent inspection lot
- B. Active a quality notification
- C. Tighten the quality level
- D. Trigger a workflow
Answer: B,D
NEW QUESTION # 35
During the production inspection, which elements does the system use to determine the layout of results and defects recordings? Note : 3 correct answer
- A. Code groups
- B. Report type
- C. Partner profiles
- D. Status profiles
- E. Confirmation profiles
Answer: A,B,E
NEW QUESTION # 36
What do the selection and evaluation of audit monitoring display? Note : 2 correct answer
- A. Detailed audit valuation
- B. The QM-STI(Quality Management- Statistic Interface)report
- C. Tabular Overview lists of audit components
- D. Audit component according to different criteria
Answer: C,D
NEW QUESTION # 37
What causes the system to issue a message to prevent you from closing a notification?
- A. Missing complaint quantity
- B. Open activities
- C. Open tasks
- D. Missing catalog profile
Answer: C
NEW QUESTION # 38
After you create customer master records, you define second inspection related default specification in the ....
Which of the followings options can you use to control when the quality inspection take place (2 correct ans)
- A. The inspection occurs after the good issue in posted
- B. The inspection occurs after the transport order is quit.
- C. The inspection occurs before the good issue in posted
- D. The inspection occurs after the release of the sales order
Answer: A,C
NEW QUESTION # 39
During an inspection the lab technicians record the same test values for an inspection characteristic.
Which of the following do they assign to the products?
- A. As a partial lot
- B. As a batch
- C. As an inspection point
- D. As a sample size
Answer: C
NEW QUESTION # 40
The QM control key in the procurement data of the material master controls all but one of the following indicator(Which function does not control) ?
- A. Delivery release
- B. Certificate Management
- C. First sample inspection
- D. Invoice Block
Answer: C
NEW QUESTION # 41
Which of the following documents can you use as a reference document when creation a customer claim?(2 correct ans )
- A. Material document
- B. Delivery
- C. Quotation
- D. QM order
- E. Sales order
Answer: B,E
NEW QUESTION # 42
You have determined a new business inspection process and need to customize a new inspection type Which of the following activities must you complete? Correct 2
- A. Define goods movement type
- B. Assign Task list type to material types
- C. Define default values for inspection type
- D. Assign inspection type to inspection lot origin
Answer: C,D
NEW QUESTION # 43
Which following inspection origin are directly related to sale and distribution (SD) functions 3 correct answers
- A. Goods issue
- B. Good receipts
- C. Delivery to customer with customer order
- D. Plant maintenance
- E. General delivery
Answer: B,C,E
NEW QUESTION # 44
Which business object must you use to create a stability study?
- A. Physical sample
- B. Quality inspection lot
- C. Quality notification
- D. Sample drawing procedure
Answer: C
NEW QUESTION # 45
What must you do in configuration to enable defects recording during an inspection with inspection lots? Note : 2 correct answer
- A. Activate the work flow template
- B. Activate reference to Existing notifications.
- C. Assign the notification type to the inspection type.
- D. Define the defect report type
Answer: C,D
NEW QUESTION # 46
When you post a good receipt, where does the system check the current inspection stage for a material/vendor combination for upcoming inspection .
- A. Characteristic
- B. Sampling scheme
- C. Inspection Plan
- D. Quality level
Answer: D
NEW QUESTION # 47
The system assigns an active inspection type during inspection lot creation Where can the system choose the inspection type? Note : 3 correct answer
- A. From the Quality info Record
- B. From the material specification
- C. From the Quality level
- D. From the inspection type assigned to an order type
- E. From the Preferred inspection type in material master
Answer: C,D,E
NEW QUESTION # 48
For what type of cost collector does an inspection lot capture appraisal and non conformity costing?
- A. A controlling general ledger
- B. A quality Notification
- C. A quality management order
- D. A company code general ledger
Answer: C
NEW QUESTION # 49
Which object type is not stored directly in the data set of a supplier claim notification?
- A. Material document
- B. Quotation
- C. Purchasing organization
- D. Purchasing document
Answer: B
NEW QUESTION # 50
......
Latest Questions C_TS414_2021 Guide to Prepare Free Practice Tests: https://www.trainingdump.com/SAP/C_TS414_2021-practice-exam-dumps.html
C_TS414_2021 Practice Exam - 82 Unique Questions: https://drive.google.com/open?id=1pO9jvPstPObG2jFt_l0FBdx-o2Yjro4I