Updated Free Cisco 300-715 Test Engine Questions with 153 Q&As
The Best CCNP Security 300-715 Professional Exam Questions
Understanding functional and technical aspects of Implementing and Configuring Cisco Identity Services Engine (300-715 SISE) Endpoint compliance
The following will be discussed in CISCO 300-715 dumps:
- Configure endpoint identity management
- Implement profiler services
- Implement probes
- Implement CoA
NEW QUESTION 11
Refer to the exhibit Which component must be configured to apply the SGACL?
- A. ingress router
- B. host
- C. egress router
- D. secure server
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/trustsec/configuration/guide/trustsec/arch_over.html#52796
NEW QUESTION 12
A network administrator changed a Cisco ISE deployment from pilot to production and noticed that the JVM memory utilization increased significantly. The administrator suspects this is due to replication between the nodes What must be configured to minimize performance degradation?
- A. Enable the endpoint attribute filter
- B. Ensure that Cisco ISE is updated with the latest profiler feed update
- C. Review the profiling policies for any misconfiguration
- D. Change the reauthenticate interval.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/admin_guide/b_ise_admin_guide_23/b_ise_admin_guide
NEW QUESTION 13
An engineer is configuring 802.1X and wants it to be transparent from the users' point of view. The implementation should provide open authentication on the switch ports while providing strong levels of security for non-authenticated devices. Which deployment mode should be used to achieve this?
- A. low-impact
- B. open
- C. closed
- D. high-impact
Answer: A
Explanation:
Explanation
https://www.lookingpoint.com/blog/cisco-ise-wired-802.1x-deployment-monitormode#:~:text=Low%20imp
NEW QUESTION 14
An administrator needs to connect ISE to Active Directory as an external authentication source and allow the proper ports through the firewall. Which two ports should be opened to accomplish this task? (Choose two)
- A. HTTPS 443
- B. LDAP 389
- C. HTTP 80
- D. TELNET 23
- E. MSRPC 445
Answer: B,E
NEW QUESTION 15
A network administrator is setting up wireless guest access and has been unsuccessful in testing client access.
The endpoint is able to connect to the SSID but is unable to grant access to the guest network through the guest portal. What must be done to identify the problem?
- A. Use the endpoint ID to execute a session trace.
- B. Use the identity group to validate the authorization rules.
- C. Use traceroute to ensure connectivity.
- D. Use context visibility to verify posture status.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide
NEW QUESTION 16
What is the condition that a Cisco ISE authorization policy cannot match?
- A. posture
- B. company contact
- C. custom
- D. device type
- E. time
Answer: C
NEW QUESTION 17
Refer to the exhibit.
An organization recently implemented network device administration using Cisco ISE. Upon testing the ability to access all of the required devices, a user in the Cisco ISE group IT Admins is attempting to login to a device in their organization's finance department but is unable to. What is the problem?
- A. The authorization conditions wrongly allow IT Admins group no access to finance devices.
- B. The finance location is not a condition in the policy set.
- C. The authorization policy doesn't correctly grant them access to the finance devices.
- D. The IT training rule is taking precedence over the IT Admins rule.
Answer: B
NEW QUESTION 18
A customer wants to set up the Sponsor portal and delegate the authentication flow to a third party for added security while using Kerberos Which database should be used to accomplish this goal?
- A. LDAP
- B. Local Database
- C. Active Directory
- D. RSA Token Server
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/admin_guide/b_ise_admin_guide_26/b_ise_admin_guide_26_chapter_01111.html#concept_srz_bkb_4db
NEW QUESTION 19
When configuring an authorization policy, an administrator cannot see specific Active Directory groups present in their domain to be used as a policy condition. However, other groups that are in the same domain are seen What is causing this issue?
- A. The groups are not added to Cisco ISE under the AD join point
- B. The groups are present but need to be manually typed as conditions
- C. Cisco ISE only sees the built-in groups, not user created ones
- D. Cisco ISE's connection to the AD join point is failing
Answer: A
Explanation:
https://www.youtube.com/watch?v=0kuEZEo564s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION 20
What must be configured on the Cisco ISE authentication policy for unknown MAC addresses/identities for successful authentication?
- A. reject
- B. drop
- C. pass
- D. continue
Answer: D
Explanation:
Reference:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_id_stores.html
NEW QUESTION 21
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION 22
An engineer is implementing Cisco ISE and needs to configure 802.1X. The port settings are configured for port-based authentication. Which command should be used to complete this configuration?
- A. dot1x pae authenticator
- B. dot1x system-auth-control
- C. authentication port-control auto
- D. aaa authentication dot1x default group radius
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sg/configuration/guide/conf/dot1x.
NEW QUESTION 23
Which two values are compared by the binary comparison (unction in authentication that is based on Active Directory?
- A. user-presented certificate and a certificate stored in Active Directory
- B. subject alternative name and the common name
- C. user-presented password hash and a hash stored in Active Directory
- D. MS-CHAPv2 provided machine credentials and credentials stored in Active Directory
Answer: B
Explanation:
Basic certificate checking does not require an identity source. If you want binary comparison checking for the certificates, you must select an identity source. If you select Active Directory as an identity source, subject and common name and subject alternative name (all values) can be used to look up a user. https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_01110.html
NEW QUESTION 24
Which two ports must be open between Cisco ISE and the client when you configure posture on Cisco ISE? (Choose two).
- A. TCP 8443
- B. TCP 8905
- C. TCP 80
- D. TCP 8906
- E. TCP 443
Answer: A,B
NEW QUESTION 25
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. radius-server attribute 8 include-in-access-req
- B. radius server vsa sand authentication
- C. ip device tracking
- D. dot1x system-auth-control
- E. aaa authorization auth-proxy default group radius
Answer: A,B
NEW QUESTION 26
When configuring an authorization policy, an administrator cannot see specific Active Directory groups present in their domain to be used as a policy condition. However, other groups that are in the same domain are seen What is causing this issue?
- A. The groups are not added to Cisco ISE under the AD join point
- B. The groups are present but need to be manually typed as conditions
- C. Cisco ISE only sees the built-in groups, not user created ones
- D. Cisco ISE's connection to the AD join point is failing
Answer: A
Explanation:
Explanation
https://www.youtube.com/watch?v=0kuEZEo564s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION 27
Which two responses from the RADIUS server to NAS are valid during the authentication process? (Choose two )
- A. access-reserved
- B. access-accept
- C. access-request
- D. access-response
- E. access-challenge
Answer: A,E
NEW QUESTION 28
When creating a policy within Cisco ISE for network access control, the administrator wants to allow different access restrictions based upon the wireless SSID to which the device is connecting. Which policy condition must be used in order to accomplish this?
- A. Radius Called-Station-ID CONTAINS <SSID Name>
- B. DEVICE Device Type CONTAINS <SSID Name>
- C. Airespace Airespace-Wlan-ld CONTAINS <SSID Name>
- D. Network Access NetworkDeviceName CONTAINS <SSID Name>
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115734-ise-policies-ssid-00.ht
NEW QUESTION 29 
Refer to the exhibit. In which scenario does this switch configuration apply?
- A. when preventing users with hypervisor
- B. when passing IP phone authentication
- C. when allowing a hub with multiple clients connected
- D. when allowing multiple IP phones to be connected
Answer: C
Explanation:
Explanation
https://www.linkedin.com/pulse/mac-authentication-bypass-priyanka-kumari#:~:text=Multi%2Dauthentication%
NEW QUESTION 30
......
Career Prospects and Salary Outlook
Completing the Cisco 300-715 exam and obtaining one of the associated certificates gives you vast opportunities for your career advancement. After passing this test, you will have the solid knowledge and skills required for performing various network security tasks. Some of the job roles that are available to the successful candidates as well as the annual salary rates related to them are as follows:
- Project Manager, Information Technology (IT) – $35,000
- Development Operations (DevOps) Engineer – $110,000
- Systems Engineer (Computer Networking/IT) – $60,000
- Network Engineer – $83,000
- Program Manager, Software Applications – $145,000
- Software Engineer/Developer/Programmer – $154,000
- Senior Technical Consultant – $140,000
- Network Manager – $131,000
- Network Engineer – $119,000
- Senior Systems Engineer – $106,000
- Technical Specialist – $81,000
- Network Security Engineer – $105,000
- Network Specialist – $85,000
- Security Consultant, (Computing/Networking/Information Technology) – $160,000
Your exact remuneration will depend on numerous factors such as your previous professional background, location, the organization you work for, specific job title, among others. Anyway, with the certifications earned through passing the Cisco 300-715 exam, you stand a better chance of landing a prestigious and well-paying job in the security field.
Try 100% Updated 300-715 Exam Questions [2021]: https://www.trainingdump.com/Cisco/300-715-practice-exam-dumps.html
Pass 300-715 Exam - Real Questions & Answers: https://drive.google.com/open?id=1bgpa4zp_OOFh7arDwyCiGBdvdVwuOr-3