Cisco Troubleshooting Cisco Data Center Infrastructure - 300-615 Exam Practice Test
Refer to the exhibit.

An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?

An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
Correct Answer: D
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Refer to the exhibit.
An mini-storage M2 storage card fails to be added to Cisco UCS Manager. Which configuration resolves the issue?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
The Cisco UCS Manager fails to integrate with Cisco Intersight. The requirement is to monitor and configure the UCS environment from UCS Manager as well as Cisco Intersight. However, Cisco Intersight can monitor only the managed devices. Which action resolves the issue?
Correct Answer: B
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
Refer to the exhibit.

An engineer must connect N2K-Fex-1 and N5K-Core-1 so that the traffic flow between the two devices uses load balancing. After inspecting the statistics of the interconnecting interfaces, the engineer concludes that only one link is used. Which action resolves the problem?

An engineer must connect N2K-Fex-1 and N5K-Core-1 so that the traffic flow between the two devices uses load balancing. After inspecting the statistics of the interconnecting interfaces, the engineer concludes that only one link is used. Which action resolves the problem?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
Refer to the exhibit.

The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?

The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?
Correct Answer: C
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
What does this adapter output indicate?
adapter 1/6/1 (fls): 2# lunlist 9
vnic: 9 lifid: 6
- FLOGI State : flogi est (fc_id Oxac0e04)
- PLOGI Sessions
- WWNN 50:0a:09:83:8d:53:43:44 WWPN 50:0a:09:83:8d:53:43:44 fc_id 0x000000
- LUN ' s configured (SCSI Type, Version, Vendor, Serial No.)
- LUN ID: Ox0000000000000000 access failure
-REPORT LUNs Query Response
- Nameserver Query Response
-WWPN: 54:b1:6a:94:64:3e:73:44
adapter 1/6/1 (fls): 2# lunlist 9
vnic: 9 lifid: 6
- FLOGI State : flogi est (fc_id Oxac0e04)
- PLOGI Sessions
- WWNN 50:0a:09:83:8d:53:43:44 WWPN 50:0a:09:83:8d:53:43:44 fc_id 0x000000
- LUN ' s configured (SCSI Type, Version, Vendor, Serial No.)
- LUN ID: Ox0000000000000000 access failure
-REPORT LUNs Query Response
- Nameserver Query Response
-WWPN: 54:b1:6a:94:64:3e:73:44
Correct Answer: B
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
An engineer is implementing, Fibre Channel (FC) switching on a Cisco 9000 Series Switch, but the procedure fails with the message " FC traffic is not being routed through the fabric. " . Which action resolves the issue?
Correct Answer: C
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
Refer to the exhibit.

The EEM applet generates an SNMP string every time a user executes the show ip route command After the applet was deployed, other engineers reported that they can no longer use the show ip route command to view the routing information. Which action resolves the issue?

The EEM applet generates an SNMP string every time a user executes the show ip route command After the applet was deployed, other engineers reported that they can no longer use the show ip route command to view the routing information. Which action resolves the issue?
Correct Answer: C
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
An engineer is troubleshooting a packet flow from an access leaf to spine. Which EVPN routes are expected on this connection?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
Refer to the exhibit.

An administrator directly connects a Fibre Channel storage array to ports 1 through 4 on a Cisco UCS 6454 Fabric Interconnect. The administrator configures a service profile to boot directly from the new Fibre Channel storage array, but the service profile fails to boot. When the administrator checks the output of the show flogi database command on the fabric interconnect, it shows the output presented in the exhibit. Which action resolves the issue?

An administrator directly connects a Fibre Channel storage array to ports 1 through 4 on a Cisco UCS 6454 Fabric Interconnect. The administrator configures a service profile to boot directly from the new Fibre Channel storage array, but the service profile fails to boot. When the administrator checks the output of the show flogi database command on the fabric interconnect, it shows the output presented in the exhibit. Which action resolves the issue?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
An engineer troubleshoots a VXLAN EVPN data center. The applications in the data center fail to reach the DNS server that is located at IP 10.10.10.10. The engineer examines the BGP EVPN routing table and notes that the IP prefix route covers the DNS server is missing. Which action resolve the issue?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Refer to the exhibit. The data centers are connected using the E-VPN Multi Site solution. However VLAN 10 tails to extend to the secondary site with the message shown. Which action extends VLAN 10 to the secondary site?
Correct Answer: B
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS. The switches are connected using port channel and are experiencing packet loss. Which action should be performed on the Cisco Nexus switch ports to resolve this issue?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Refer to the exhibit. An engineer discovered a VFC interface in a down state on a Cisco Nexus Switch. Which action resolves the problem?
Correct Answer: C
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).