CWNP Wireless Network Administrator (CWNA) - CWNA-109 Exam Practice Test

The center frequency of channel 1 in the 2.4 GHz band is 2.412 GHz (2412 MHz). What is the center frequency of channel 4?
Correct Answer: C
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
You are evaluating a connection that states the data rate is 150 Mbps. What is the expected throughput of this connection?
Correct Answer: D
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
You are troubleshooting a controller-based AP that is unable to locate the controller. DHCP is not use and the controller is located at 10.10.10.81/24 while the AP is on the 10.10.16.0/24 network.
What should be inspected to verify proper configuration?
Correct Answer: B
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
You are troubleshooting a problem with a new 802.11ax AP. While the AP supports four spatial streams, most clients are only achieving maximum data rates of 150 Mbps. What is the likely cause?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
What ID is typically mapped to an AP's MAC address if a single BSS is implemented?
Correct Answer: B
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
A string of characters and digits is entered into an AP and a client STA for WPA2 security. The string is 8 characters long. What is this string called?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
You have received a report of poor wireless connections on the third floor of a building under your administration. Three individuals have reported the problem. Apparently, the connections are reporting a strong signal, but the users cannot access the Internet. With the problem identified, what is the next logical step in the troubleshooting process?
Correct Answer: D
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
A wireless engineer needs to calculate the total loss of an RF signal as it travels through free space between a transmitting and receiving antenna. What is this calculation called?
Correct Answer: D
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
During a post-implementation survey, you have detected a non-802.11 wireless device transmitting in the area used by handheld 802.11g scanners. What is the most important factor in determining the impact of this non-802.11 device?
Correct Answer: D
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
You are implementing a multi-AP WLAN and fast secure roaming is essential. Which one of the following methods is an IEEE 802.11 standard method for fast roaming?
Correct Answer: A
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
What cipher suite is specified by the 802.11-2016 standard and is not deprecated?
Correct Answer: B
Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).
0
0
0
0