HPE3-U01 Exam Training Practice Tests (HP Aruba Certified Network Technician)]

Question 1

Which dual-band IEEE WLAN standard provides up to 4.8 Gbps of theoretical data rate?

A. 802.1 In B. 802.11 be C. 802.1 lax D. 802.11 ac

Correct Answer: B

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Question 2

What are characteristics of Aruba Central? (Select two.)

A. It manages networking equipment using SNMP. B. It must be deployed as an on-premises server. C. It can manage third-party networking equipment. D. It is considered cloud-based network management. E. It manages networking equipment using HTTPs.

Correct Answer: D,E

Question 3

What is the maximum recommended distance for a 1 Gbps Ethernet connection using Cat 6 UTP-based cabling between a host and the switch where it is plugged in?

A. 300 meters (984 feet) B. 100 meters (328 feet) C. 15 meters (49 feet) D. 50 meters (164 feet)

Correct Answer: B

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Question 4

Refer to Exhibit.

The PCs are not able to successfully establish bidirectional communication. What change must you deploy to enable the communication between PC-1 and PC-2?

A. change PC-1 's default gateway to 172.16.30.2 B. change PC-2's default gateway to 172.16.31.254 C. change PC-1's IP address to 172.16.30.10 D. change the Router's 1/1/1 interface IP to 172.16.30.254

Correct Answer: B

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Question 5

Which condition allows 5Ghz channels to avoid Adjacent Channel Interference?

A. transmit at 40 MHz bandwidth B. transmit at low power levels C. transmit at 20 MHz bandwidth D. transmit at high power levels

Correct Answer: A

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Question 6

Which accurately describes the TCP/IP Model? (Select two.)

A. It specifies how to compress, fragment, encrypt, and analyze data. B. It specifies how to assemble, address, transmit, route, and disassemble a data packet. C. It is a set of communication protocols used on Ethernet-based networks only. D. It is a set of communication protocols used on IP-based networks only. E. It is a set of communication protocols used on TCP-based networks only.

Correct Answer: B,D

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

Question 7

Which statement accurately describes an omnidirectional antenna?

A. Radiates almost equal power in all directions in the Horizontal Plane. B. Radiates almost equal power in all directions in the Vertical Plane. C. Radiates equal power in all directions in the Elevation Plane. D. Radiates more power in a specific angle and less power in others.

Correct Answer: A

Explanation: Only visible for TrainingDump members. You can sign-up / login (it's free).

HP Aruba Certified Network Technician - HPE3-U01 Exam Practice Test