Senior-Internal-Corrosion-Technologist Exam Training Practice Tests (AMPP Internal Corrosion for Pipelines

Question 1

In the event of a conflict between the Product Data Sheet and the Specification:

A. The Product Data Sheet prevails B. The Specification prevails C. It is up to the Applicator to decide which one to follow D. It is up to the Inspector to decide which one to follow

Correct Answer: A

Question 2

When measuring the Dry Film Thickness of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument Is the:

A. Eddy Current Gauge B. Ultra Sonic DFT Gauge C. Magnetic Gauge D. Tooke Gauge

Correct Answer: B

Question 3

Non-Conformance Reports are designed to:

A. Elevate the status of the Inspector B. To Identify items that do not meet the specification requirements C. Punish the Contractor for substandard work D. Assist the Owner in negotiating credits from the Contractor

Correct Answer: B

Question 4

Surface preparation methods for Non-ferrous metals are:

A. Specific for each type of Non-Ferrous metal B. The same as for Ferrous metals C. Not required D. The same for all Non-Ferrous metals

Correct Answer: A

Question 5

From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals Is:

A. Safety B. Appearance C. Iron content D. Cost

Correct Answer: C

Question 6

On pipelines, which coating is Identifiable by Its distinct colors, usually light blue, green, or grey?

A. Coal Tar Enamel B. Heat-shrink sleeves C. Concrete D. Liquid epoxies

Correct Answer: D

Question 7

When environmental enclosures ate being used an inspector needs to be concerned about:

A. a), b), and c) B. Air changes C. Lighting D. Structural integrity

Correct Answer: A

Question 8

You ate the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no Individual gauge reading shall be below a certain value. As this is not part of the standard you should:

A. Ignore the additional requirement B. Request clarification from the specifier C. Enforce the additional requirement D. Call your supervisor

Correct Answer: B

AMPP Internal Corrosion for Pipelines - Level 2 - Senior-Internal-Corrosion-Technologist Exam Practice Test