[2021] Use Valid New Free CTAL-TAE Exam Dumps & Answers
CTAL-TAE Braindumps PDF, ISQI CTAL-TAE Exam Cram
ISQI CTAL-TAE Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 10
Which of the following attributes should NOT be included in a test execution report associated with a suite of automated tests?
- A. Environment in which the tests have been executed
- B. Summary of the test execution results
- C. Defect clusters identified during test execution
- D. System/Application under test and its version
Answer: C
NEW QUESTION 11
You are using a gTAA to create a TAS for a project. The TAS is aimed at automatically and executing test cases based on a use-case Modeling approaching that uses UML as a modeling language. All the interaction between TAS and SUT will only be at the API and GUI level.
Which of the following components of the gTAA would you EXCLUDE from the TAS?
- A. The test reporting component of the test execution layer.
- B. The test execution (test engine of the test execution layer
- C. The Command Line Interface (CLI) component of the test adaptation layer
- D. The Test execution component of the test generation layer
Answer: C
NEW QUESTION 12
You are using a gTAA to create a TAS for a project. The TAS is aimed specifically at automating a suit of existing manual test cases for standalone desktop applications. All the interfaces between the TAS and SUT will be from the CUI of the application.
Which of the following layers of the gTAA should you focus on for the TAS?
- A. The Test Execution layer
- B. The Test Adaption layer
- C. The test Generation layer
- D. The Test Definition layer
Answer: C
NEW QUESTION 13
Which of the following statements BEST describe aspects of the SUT to consider when designing a TAA?
- A. All the interface of the SUT affected by the tests should be controllable by the TAA
- B. All the internal test interfaces of the SUT should be removed prior to the product release
- C. All the external test interfaces of the SUT should be removed prior to the product release
- D. All the interaction between SUT and TAS should be logged with the highest level of detail
Answer: D
NEW QUESTION 14
Which of the following is NOT a technical design consideration for a TAA?
- A. The number of users for the SUT
- B. Standards and Legal requirements, e.g data privacy
- C. Data used by the SUT, e.g configuration, users
- D. Availability of interfaces for the SUT to be testable
Answer: A
NEW QUESTION 15
Which of the following BEST describes why it is important to separate test definition from test execution in a TAA?
- A. It allow choosing different paradigms (e.g event-driven) for the interaction TAS and SUT
- B. It allows specify test cases without being closely tied to the tool to run them against the SUT
- C. It allows developing steps of the test process without being closely tied to the SUT interface.
- D. It allows testers to find more defects on the SUT
Answer: D
NEW QUESTION 16
A web application was released into production one year ago, it has regular release which follow a V-model lifecycle and testing is well-established and fully integration into the development lifecycle. You have beenasked to implement a TAS for the regression test suite. The regression tests have been developed via the GUI and are expected to be run at least four times a month, for each planned release, for the whole operation solution life of the system (six years). Each screen of the GUI uses several third-party controls which are not compatible with the existing automation solutions. The environment for the automation will be stable, fully controllable and separated from other environments (development, staging, production).
What could be the MOST problematic for this TAS?
- A. Sustainability of the automated environment
- B. Frequency ofuse
- C. Maturity of the test process
- D. Complexity to automate
Answer: A
NEW QUESTION 17
Youare using a gTAA to create a TAS for a project. The TAS is aimed specifically at automating a suit of existing manual test cases for standalone desktop applications. All the interfaces between the TAS and SUT will be from the CUI of the application.
Whichof the following layers of the gTAA should you focus on for the TAS?
- A. The Test Execution layer
- B. The test Generation layer
- C. The Test Adaption layer
- D. The Test Definition layer
Answer: C
NEW QUESTION 18
Which of the following statement about the implementation of automated regression testing is FALSE?
- A. When automating regression tests, the initialization stepsset the test preconditions should be automated wherever possible
- B. When automating regression tests, consideration should be given to how much time would be saved by automation
- C. When automating regression tests, the structure of automated tests must always be the same as the corresponding manual tests
- D. When automating regression tests, the corresponding manual tests should have already been executed to verify they operate correctly
Answer: D
NEW QUESTION 19
Designing the System Under Test (SUT) for testability is important for a good test automation approach and can also benefit manual test execution.
Which of the following is NOT a consideration when designing for testability?
- A. Clearly defined architecture: The SUT Architecture needs to provide clear and understandable interfaces giving control and visibility on all test levels.
- B. Observability: The SUT needs to provide interface that give insight into the system.
- C. Control: the SUT needs to provide interfaces that can be used to perform actions on SUT.
- D. Re-useability: The code written for the SUT must be re-useable for other similar system.
Answer: D
NEW QUESTION 20
Which of the following is NOT an advantage of test automation?
- A. The ability to enable a better use of skilled testers by freeing them from repetitive and boring tasks
- B. The ability to perform tests which would be difficult or impossible to execute manually
- C. The ability to find more defects with the same tests, compared to executing the same test manually
- D. The ability to run more tests in less time and therefore to make it possible to run them more often
Answer: C
NEW QUESTION 21
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?
- A. The defect density in the automation code of the regression test suite.
- B. The ratio of commands to executable statements in the automation code of the regression test suite
- C. The SUT code coverage provided by the execution of the regression test suite.
- D. The ratio of comments to executable statements in the SUT code.
Answer: A
NEW QUESTION 22
Which of the following statements about the reuse of TAS artefacts is TRUE?
- A. Reusable TAS artefacts can include components (or parts of components) associated with different layers of the TAA
- B. To enable reuse of TAS artefacts, a good design for reuse is built into the TAA and to further action are needed during the TAS lifecycle
- C. Reusable TAS artifacts associated with the definition layer of the TAA include the adaptors to the SUT components and/or interfaces
- D. Communications maintenance and improvements for reusing TAS artefacts are modifyaddressed during the design of the TAA
Answer: B
NEW QUESTION 23
You have been asked todeterminea TAS for a new release of a SUT, test should be automatedwherever. The new release will consist of 5 new interfaces and an amendment to 3 existing interfaces. The new and amended interface will be deliver incrementally in 3 sprints, each lasting 2 weeks.
What would be the BEST Test Automation Solution (TAS) design in this scenario?
- A. Automate the tests at two levels, Component and System level. Create customized hooks at Component level for interface not yet developed or amended. Only use the newly developed or amended interfaces to test at System level.
- B. Automate a test at once level, component level, Create customized interface/test hooks for this level where the interface has not yet been developed or amended.
- C. Automate tests at one level only, System level. Use only the newly developed interfaces and do not create any customized interfaces/test hooks.
- D. Automate tests at both Component and System Level. Only do this automation once every interface has been fully developed or amended and manual testing has completed successfully.
Answer: A,D
NEW QUESTION 24
You identified a suitable project to pilot an automation tool and planned and conduced a pilot. The pilot has been successful and tool Is being deployed within your organization, with a plan to increase tool use by the one project at a time. During this rollout some test processes will be changed slightly to gain additional benefits from using the tool.
In the pilot project, a small set of manual tests were automated for the first time. You are currently monitoring the test automation efficiency and this reveals that the automationregimefor the tests is not yet mature.
Which of the following statements is TRUE?
- A. The approach used for deployed this tool is aligned to the standard success factor for deployment
- B. The pilot project should have been critical so that maximum benefits were delivered
- C. The test process should be radically changed to gain additional benefits from using the tool.
- D. The target defined for the project was inappropriate, because the automationregimeforthe automated tests at the end of the pilot is not yet mature.
Answer: C
NEW QUESTION 25
Consider the following example of TAS metrics.
Time to execute automated tests
Speed and efficiency of TAS components
Which of the following statements is TRUE?
- A. A and B are both internal TAS metrics
- B. A and b are both external TAS metric
- C. A is and external TAS metric and b is an internal TAS metric
- D. A is an internal TAS metric and B is an external TAS metric
Answer: A
NEW QUESTION 26
You are working on a TAS forstandaloneapplication. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements includemenus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST step that you take to investigate this issue?
- A. Adopt an approach that uses the coordinates of the GUI elements instead
- B. Verify the testability support with the providers of the third party components
- C. Verify whether the GUI identification depends on the browser.
- D. Verify whether naming standards for variables and have been defined for the current automation solution
Answer: A
NEW QUESTION 27
Your goal is to verify completeness, consistency and correct behavior of an automated test suite. The TAS has been proven to successfully install in the SUT environment. All the preliminary checks to verify the correct functioning of the automated test environment and test tool configuration, installation and setup have successfully completed.
Which of the following is NOT a relevant check for achieving your goal in this scenario?
- A. Checking whether all the test cases produce repeatable outcomes
- B. Checking whether all the test cases contain the expected results
- C. Checking whether the post condition have been fulfilled for all the test cases
- D. Checking whether theloading of the TAS is repeatable in the SUT environment
Answer: A
NEW QUESTION 28
You have been asked to determine a TAS for a new release of a SUT,test should be automated wherever. The new release will consist of 5 new interfaces and an amendment to 3 existing interfaces. The new and amended interface will be deliver incrementally in 3 sprints, each lasting 2 weeks.
What would be the BEST Test Automation Solution (TAS) design in this scenario?
- A. Automate the tests at two levels, Component and System level. Create customized hooks at Component level for interface not yet developed or amended. Only use the newly developed or amended interfaces to test at System level.
- B. Automate a test at once level, component level, Create customized interface/test hooks for this level where the interface has not yet been developed or amended.
- C. Automate tests at one level only, System level. Use only the newly developed interfaces and do not create any customized interfaces/test hooks.
- D. Automate tests at both Component and System Level. Only do this automation once every interface has been fully developed or amended and manual testing has completed successfully.
Answer: D
NEW QUESTION 29
......
Feel ISQI CTAL-TAE Dumps PDF Will likely be The best Option: https://www.trainingdump.com/ISQI/CTAL-TAE-practice-exam-dumps.html
New 2021 CTAL-TAE Sample Questions Reliable CTAL-TAE Test Engine: https://drive.google.com/open?id=15zt3hxKXI8aOTtb9NLcGkA9cRT5tsbjl