Use Real ISQI Achieve the CTAL-TAE Dumps - 100% Exam Passing Guarantee
Verified CTAL-TAE Q&As - Pass Guarantee CTAL-TAE Exam Dumps
NEW QUESTION 12
Your goal is to verify completeness, consistency and correct behavior of an automated test suite. The TAS has been proven to successfully install in the SUTenvironment. All the preliminary checks to verify the correct functioning of the automated test environment and test tool configuration, installation and setup have successfully completed.
Which of the following is NOT a relevant check for achieving your goal in this scenario?
- A. Checking whether all the test cases contain the expected results
- B. Checking whether the post condition have been fulfilled for all the test cases
- C. Checking whether all the test cases produce repeatable outcomes
- D. Checking whether the loading of the TAS is repeatable in the SUT environment
Answer: C
NEW QUESTION 13
Which of the following attributes should NOT be included in a test execution report associated with a suite of automated tests?
- A. Summary of the test execution results
- B. Defect clusters identified during test execution
- C. System/Application under test and its version
- D. Environment in which the tests have been executed
Answer: A
NEW QUESTION 14
Assume that you are the TAE responsible for the correct functioning of a TAS, deployed in a test environment that consists of a few machines running the same version of the operating system. The TAS has been working and stable since its deployment, it has been used to run an automated test suite consisting of many similar automated test. The infrastructure team is planning to update the operating system on these machines by installing a new the service pack for security reasons. Since the vendor of the operating system assurance full backward compatibility, the infrastructure team assurance that there will be no impacts on the functioning of the TAS.
What is the BEST approach to confirm the correct functioning of the TAS in this scenario?
- A. Do not run any tests because you can immediately confirm the correct functioning of the automated test suite
- B. Verify the behavior of the whole automated test suite by running all the automated tests
- C. Make sure that the infrastructure team has completed installing the service pack on the machines where SUT is running, then run the whole automated test suite to verify itsbehavior
- D. Verify the behavior of the automated tests by running a small tests, then gradually run the remaining tests to confirm the correct functioning of the whole automated test suite.
Answer: D
NEW QUESTION 15
You are reviewing the testability of your SUT.
Which of the following BEST refers to the characteristic of OBSERVABILITY?
- A. The abilityto identify states, outputs, intermediate result and error messages in the SUT
- B. The ability of the SUTto perform its intended function for a specified period of time
- C. The ability of the SUT to prevent unauthorized access to its components or data.
- D. The ability to exercise the SUT by entering inputs, triggering events and invoking methods
Answer: A
NEW QUESTION 16
You are working on a TAS for standalone application. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements include menus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST stepthat you take to investigate this issue?
- A. Adopt an approach that uses the coordinates of the GUI elementsinstead
- B. Verify whether the GUI identification depends on the browser.
- C. Verify whether naming standards for variables and have been defined for the current automation solution
- D. Verify the testability support with the providers of the third party components
Answer: D
NEW QUESTION 17
You are working on a TAS forstandaloneapplication. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements includemenus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST step that you take to investigate this issue?
- A. Verify the testability support with the providers of the third party components
- B. Verify whether the GUI identification depends on the browser.
- C. Verify whether naming standards for variables and have been defined for the current automation solution
- D. Adopt an approach that uses the coordinates of the GUI elements instead
Answer: D
NEW QUESTION 18
A defect in a SUT has been resolved and validated by an automated defect re-test in the current release of the software. This retest has now been added to the automated regression test suite.
Which statement BEST describes a reason why this defect could re-occur in future releases?
- A. Theconfiguration management process does not properly control the synchronization between software archives
- B. The automated regression test suite is not run consistently for future releases.
- C. Automated defect confirmation testing is not effective at confirming that the resolved defect will continue to work in future releases
- D. The automated regression test suite has a narrower scope of functionality
Answer: A
NEW QUESTION 19
You have been asked to determine a TAS for a new release of a SUT,test should be automated wherever. The new release will consist of 5 new interfaces and an amendment to 3 existing interfaces. The new and amended interface will be deliver incrementally in 3 sprints, each lasting 2 weeks.
What would be the BEST Test Automation Solution (TAS) design in this scenario?
- A. Automate a test at once level, component level, Create customized interface/test hooks for this level where the interface has not yet been developed or amended.
- B. Automate the tests at two levels, Component and System level. Create customized hooks at Component level for interface not yet developed or amended. Only use the newly developed or amended interfaces to test at System level.
- C. Automate tests at one level only, System level. Use only the newly developed interfaces and do not create any customized interfaces/test hooks.
- D. Automate tests at both Component and System Level. Only do this automation once every interface has been fully developed or amended and manual testing has completed successfully.
Answer: D
NEW QUESTION 20
Assume that you are the TAE responsible for the correct functioning of a TAS, deployed in a test environment that consists of a few machines running the same version of the operating system. The TAS has been working and stable since its deployment, it has been used to run an automated test suite consisting of many similar automated test. The infrastructure team is planning to update the operating system on these machines by installing a new the service pack for security reasons. Since the vendor of the operating system assurance full backward compatibility, the infrastructure team assurance that there will be no impacts on the functioning of the TAS.
What is the BEST approach to confirm the correct functioning of the TAS in this scenario?
- A. Make sure that the infrastructure team has completed installing the service pack on the machines where SUT is running, then run the whole automated test suite to verify its behavior
- B. Verify the behavior of the automated tests by running a small tests, then gradually run the remaining tests to confirm the correct functioning of the whole automated test suite.
- C. Verify the behavior of the whole automated test suite by running all the automated tests
- D. Do not run any tests because you can immediately confirm the correct functioning of the automated test suite
Answer: D
NEW QUESTION 21
A defect in a SUT has been resolved and validated by an automated defect re-test in the current release of the software. This retest has now been addedto the automated regression test suite.
Which statement BEST describes a reason why this defect could re-occur in future releases?
- A. The configuration management process does not properly control the synchronization between software archives
- B. Automated defect confirmation testing is not effective at confirming that the resolved defect will continue to work in future releases
- C. The automated regression test suite is not run consistently for future releases.
- D. The automated regression test suite has a narrower scope of functionality
Answer: C
NEW QUESTION 22
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?
- A. The defect density in the automation code of the regression test suite.
- B. The SUT code coverage provided by the execution of the regression test suite.
- C. The ratio of commands to executable statements in the automation code of the regression test suite
- D. The ratio of comments to executable statements in the SUT code.
Answer: A
NEW QUESTION 23
As a TAE you are evaluating a functional test automation tool that will be for several projects within your organization. The projects require that tool to work effectively and efficiently with SUT's in distributed environments. The test automated tool also needs to interface with other existing test tools (test management tool and defect tracking tool.) The existing test tools subject to planned updates and their interface to the test automated tool may not work property after these updates.
Which of the following are the two LEAST important concerns related to the evaluation of the test automation in this scenario?
* Is the test automation tool able to launch processors and execute test cases on multiple machines in different environments?
* Does the test automation tool support a licensing scheme thatallows accessing different sets?
* Does the test automation tool have a large featureset, but only part of the features will be sets?
* Do the release notes for the planned updates on existing specify the impacts on their interfaces to other tools?
Does the test automation tool need to install specific libraries that could impact the SUT?
- A. B and E
- B. C and D
- C. A and C
- D. A and E
Answer: A
NEW QUESTION 24
Consider a TAS associated to dynamically changing software frequent releases. Your goal is to determine the amount of effort required to maintain the automated tests of the regression test suite for each new release of the SUT.
What is the MOST important metric to collect to achieve your goal?
- A. The time it takes to execute all the automated tests, for each new release of the SUT.
- B. The number of automated tests requiring maintenance, for each new release of the SUT.
- C. The number of automated tests which fail because of a single software defect, for each new release of the SUT
- D. The code coverage achieved with the automated tests, for each new release of the SUT
Answer: C
NEW QUESTION 25
You have been asked todeterminea TAS for a new release of a SUT, test should be automatedwherever. The new release will consist of 5 new interfaces and an amendment to 3 existing interfaces. The new and amended interface will be deliver incrementally in 3 sprints, each lasting 2 weeks.
What would be the BEST Test Automation Solution (TAS) design in this scenario?
- A. Automate a test at once level, component level, Create customized interface/test hooks for this level where the interface has not yet been developed or amended.
- B. Automate the tests at two levels, Component and System level. Create customized hooks at Component level for interface not yet developed or amended. Only use the newly developed or amended interfaces to test at System level.
- C. Automate tests at one level only, System level. Use only the newly developed interfaces and do not create any customized interfaces/test hooks.
- D. Automate tests at both Component and System Level. Only do this automation once every interface has been fully developed or amended and manual testing has completed successfully.
Answer: B,D
NEW QUESTION 26
Which of the following is NOT a technical design consideration for a TAA?
- A. Availability of interfaces for the SUT to be testable
- B. The number of users for the SUT
- C. Standards and Legal requirements, e.g data privacy
- D. Data used by the SUT, e.g configuration, users
Answer: B
NEW QUESTION 27
Consider a TAS that is going to be deployed for the first time. The TAS requires share resources and run it its own test environment. The infrastructure for the TAS has been created along with maintenance procedures. It is very unlikely the TAS will be required to work in other target Environments. There is a high-risk that when the TAS is deployed in its own test environment, a number of existing application will no longer work because of conflicts with the existing shared resources.
Which of the following activities would you expect to be MOST effective at mitigating the risk associated with the first deployment of the TAS?
- A. Testing the TAS for its ability to be implemented in other target test environments.
- B. Testing the TAS for application compatibility issues in the target environment
- C. Testing the TAS for regressions due to optimization that fix non-functional issues.
- D. Testing the TAS for ITS ability to run a shared test environment
Answer: A
NEW QUESTION 28
A SUT has an existing automated test suite.
Which of the following statements relating to the introduction of new features in the SUT is TRUE?
- A. Automated tests are not affected by the introduction of a new feature and running them against the new SUT is a waste of effort
- B. The test automation engineer should work with the business analysts to ensure the new feature is testable
- C. The introduction of a new feature could require updates or additions to the testware components
- D. It is generally more difficult to automate test cases for a new feature as the development has not yet started
Answer: A
NEW QUESTION 29
You have been asked to automate a set of functional tests at system Test level via the CLI of the SUT for the first release of a software system. The automated tests will be delivered to the learn in change of maintenance testing, who will use them for part of the regression testing. They have the following requirements.
1.The automated tests must be as fast and cheap to maintain as possible
2.The cost of adding new automated tests must be as low as possible
3.The automated tests must have a high level of independence from the tool itself Which of the following scripting techniques would be MOST suitable?
- A. Structure scripting
- B. Keyword-driven scripting
- C. Data-driven scripting
- D. Linear scripting
Answer: A
NEW QUESTION 30
Which of the following statements BEST describe aspects of the SUT to consider when designing a TAA?
- A. All the interface of the SUT affected by the tests should be controllable by the TAA
- B. All the internal test interfaces of the SUT should be removed prior to the product release
- C. All the interaction between SUT and TAS should be logged with the highest level of detail
- D. All the external test interfaces of the SUT should be removed prior to the product release
Answer: C
NEW QUESTION 31
Consider the following example of TAS metrics.
Time to execute automated tests
Speed and efficiency of TAS components
Which of the following statements is TRUE?
- A. A is and external TAS metric and b is an internal TAS metric
- B. A and b are both external TAS metric
- C. A and B are both internal TAS metrics
- D. A is an internal TAS metric and B is an external TAS metric
Answer: C
NEW QUESTION 32
Which of the following BEST describes why it is important to separate test definition from test execution in a TAA?
- A. It allows specify test cases without being closely tied to the tool to run them against the SUT
- B. It allows developing steps of the test process without being closely tied to the SUT interface.
- C. It allow choosing different paradigms (e.g event-driven) for the interaction TAS and SUT
- D. It allows testers to findmore defects on the SUT
Answer: A
NEW QUESTION 33
Which of the following statements about the reuse of TAS artefacts is TRUE?
- A. To enable reuse of TAS artefacts, a good design for reuse is built into the TAA and to further action are needed during the TAS lifecycle
- B. Reusable TAS artefacts can include components (or parts of components) associated with different layers of the TAA
- C. Reusable TAS artifacts associated with the definition layer of the TAA include the adaptors to the SUT components and/or interfaces
- D. Communications maintenance and improvements for reusing TAS artefacts are modifyaddressed during the design of the TAA
Answer: A
NEW QUESTION 34
......
Check the Free demo of our CTAL-TAE Exam Dumps with 41 Questions: https://www.trainingdump.com/ISQI/CTAL-TAE-practice-exam-dumps.html
Clear your concepts with CTAL-TAE Questions Before Attempting Real exam: https://drive.google.com/open?id=15zt3hxKXI8aOTtb9NLcGkA9cRT5tsbjl