C_TPLM30_67 Certification – Valid Exam Dumps Questions Study Guide! (Updated 97 Questions)
C_TPLM30_67 Dumps are Available for Instant Access using TrainingDump
SAP C_TPLM30_67 Exam Description:
The "SAP Certified Application Associate - SAP Maintenance & Repair with ERP 6.0 EHP7" certification exam verifies that the candidate possesses basic knowledge in the area of SAP Plant Maintenance. This certificate proves that the candidate has the required understanding within this consultant profile of the ERP solution, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Maintenance & Repair.
NEW QUESTION 36
What are consequences of activating alternative labeling for functional locations?
- A. You can change the primary functional location label and keep the old label as a historical functional location label.
- B. You can change the primary functional location label and delete the old functional location label.
- C. You can assign a serial number to a functional location.
- D. The company code is automatically included in the functional location label.
Answer: A
NEW QUESTION 37
Your customer wants to subdivide the maintenance organization by production responsibility.
What do you use to designate the contact person for coordination between production and plant maintenance?
Please choose the correct answer.
Response:
- A. Work center
- B. Plant section
- C. Controlling area
- D. Production cost center
Answer: B
NEW QUESTION 38
To display overhead costs in a maintenance order, you need to assign a costing sheet in Customizing.
To which parameter do you assign the costing sheet?
- A. Valuation categories
- B. Valuation variant
- C. Version for cost estimates
- D. Costing type
Answer: B
NEW QUESTION 39
Which of the following steps must you perform to customize priorities for a maintenance order?
- A. Assign a priority type to a technical object master record.
- B. Assign a priority type to an order type.
- C. Assign priorities to order types.
- D. Assign priorities to technical object master records.
Answer: B
NEW QUESTION 40
Your customer wants to subdivide the maintenance organization by production responsibility.
What do you use to designate the contact person for coordination between production and plant maintenance?
- A. Work center
- B. Plant section
- C. Controlling area
- D. Production cost center
Answer: B
NEW QUESTION 41
What is the purpose of the usage list for equipment history? (Choose two)
- A. To display the list of previous equipment operators
- B. To document the number of breakdowns for an object
- C. To display changes to history-related fields in an equipment master record
- D. To track where the equipment was installed
Answer: C,D
NEW QUESTION 42
Which of the following combinations must you use to create a single-cycle maintenance plan for an external service?
- A. A framework order and a maintenance order for settlement
- B. A maintenance order for settlement and an outline agreement
- C. A subcontract purchase order and an outline agreement
- D. A framework order and a subcontract purchase order
Answer: A
NEW QUESTION 43
What does the maintenance plan category determine?
- A. The grouping of similar maintenance plans together for reporting
- B. The type of maintenance call object the system generates for a due maintenance call
- C. How maintenance call objects are generated for a due maintenance call
- D. The type of technical object for the maintenance plan
Answer: B
NEW QUESTION 44
Which statements apply to a client in an SAP system?
Choose the correct answer(s).
Response:
- A. A client corresponds to a customer.
- B. In business terms, the client is a completely independent unit.
- C. Each client has their own database.
- D. A client can represent the mapping for an entire enterprise.
Answer: B,D
NEW QUESTION 45
To create a BOM for a functional location/ equipment BOM. You can use
Please choose the correct answer.
Response:
- A. Accounting
- B. Objects
- C. Planning
- D. Material BOMs
Answer: D
NEW QUESTION 46
An SC9000 controller was rebooted to test failover and is back online. Do the controllers need to be rebalanced?
- A. No; they are automatically rebalanced on the SC9000
- B. Yes; however, the other controller needs to be rebooted first
- C. Yes; this can be done from the Summary, Storage, or Hardware tab in DSM
- D. No; this is done automatically as part of the reboot process in DSM
Answer: C
NEW QUESTION 47
Which object do you use to assign number ranges for maintenance plans in Customizing?
- A. Maintenance item
- B. Maintenance planner group
- C. Technical object
- D. Maintenance plan category
Answer: D
NEW QUESTION 48
You want to set up an external refurbishment process through subcontracting, using material requirements planning (MRP)?
Which of the following must you set in the system?
- A. The Special Procurement indicator in the material master record.
- B. The Material Provision indicator for special stock in the refurbishment order header.
- C. The Subcontracting flag in the refurbishment order header.
- D. The Subcontracting flag for the refurbishment order type.
Answer: A
NEW QUESTION 49
You are deploying a new SCv2020 system with four additional SCv100 expansion enclosures. What is the spare-to-managed drive ratio?
- A. 1 spare for every 20 managed drives of that drive type
- B. 1 spare for every drive of that type per enclosure
- C. 1 spare for every 24 managed drives of that drive type
- D. 1 spare per enclosure regardless of the drive type
Answer: A
NEW QUESTION 50
In an SC8000 environment, what is a reason why Legacy Port Mode should be implemented on the front-end legacy Mode?
- A. Improve front-end redundancy
- B. Support AIX servers without NPIV
- C. Simplify iSCSI connectivity
- D. Increase front-end performance
Answer: D
Explanation:
Explanation/Reference:
Reference https://www.dell.com/storagehelp/dellstorageclient/2016R3/en-us/GUID-2D6A2482-F78D-4598- ADA3-D9E49ED3ED7F.html
NEW QUESTION 51
The view profile enables you to create a customized selection of tabs for use with technical objects.
Which Customizing step(s) must you perform to make a view profile available?
- A. Activate customized tabs for each equipment category or functional location category.
- B. Create the view profile in the master record of either equipment or functional location.
- C. Create the view profile and assign it to an object type.
- D. Create the view profile for a particular screen group and then assign it to a functional location category or equipment category.
Answer: D
NEW QUESTION 52
Your customer wants to assign personnel to order operations.
Which master data must exist in the system?
- A. A personnel profile
- B. A personnel number
- C. A requirements profile
- D. A personnel indicator in the control key
Answer: B
NEW QUESTION 53
What is the info cube dimensions?
- A. Functional location/equipment
- B. Message reader
- C. Project analysis
- D. Maintenance
- E. Controller
Answer: A
NEW QUESTION 54
Which of the following information can the shift report display? (Choose three)
- A. Maintenance orders and notifications
- B. Maintenance plans and task lists
- C. Digital signatures for approval of a shift report
- D. Planned and actual costs for shifts
- E. Measurement documents and goods movements
Answer: A,C,E
NEW QUESTION 55
Refer to the exhibit.
Which port on the second SC280 expansion enclosure is used to connect the first expansion enclosure to the second expansion enclosure on the A-side of this configuration?
- A. A = Port A, left EMM
- B. D = Port B, Right EMM
- C. C = Port C, Left EMM
- D. B = Port B, Left EMM
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 56
You are implementing a front-end connection in Legacy Port Mode on an SC4020 16 Gb FC array with two FC switches. Can full redundancy be achieved and if so, how many ports per switch can be used by the SC Series array?
- A. Yes; two ports on each of the FC switches
- B. Yes; eight ports on each of the FC switches
- C. Yes; four ports on each of the FC switches
- D. No; full redundancy cannot be achieved
Answer: A
NEW QUESTION 57
Your customer wants to assign personnel to order operations. Which master data must exist in the system?
Please choose the correct answer.
Response:
- A. A personnel profile
- B. A personnel number
- C. A requirements profile
- D. A personnel indicator in the control key
Answer: B
NEW QUESTION 58
......
SAP C_TPLM30_67 Exam Practice Test Questions: https://www.trainingdump.com/SAP/C_TPLM30_67-practice-exam-dumps.html