Get Instant Access of 100% Real Cisco 350-401 Exam Questions with Verified Answers
Exam Dumps for the Preparation of Latest 350-401 Exam Questions
NEW QUESTION # 767
Drag and drop the characteristics from the left onto the protocols they apply to on the right?
Answer:
Explanation:
Explanation:
Diagram Description automatically generated
NEW QUESTION # 768
Refer to me exhibit.
Refer to the exhibit. What is the effect of this configuration?
- A. When users attempt to connect to vty lines 0 through 4, the device will authenticate them against TACACS+ if local authentication fails
- B. The device will allow only users at 192.166.0.202 to connect to vty lines 0 through 4
- C. The device will authenticate all users connecting to vty lines 0 through 4 against TACACS+
- D. The device will allow users at 192.168.0.202 to connect to vty lines 0 through 4 using the password ciscotestkey
Answer: C
NEW QUESTION # 769 
Refer to the exhibit. After running the code in the exhibit. Which step reduces the amount of data that NETCONF server returns to the NETCONF client, to only the interface's configuration?
- A. Create a JSON filter as a string and pass it to the get_config() method as an argument.
- B. Use the txml library to parse the data returned by the NETCONF server for the interface's configuration
- C. Use the JSON library to parse the data returned by the NFTCONF server for the interface's configuration.
- D. Create an XML filter as a string and pass it to get_config() method as an argument.
Answer: D
NEW QUESTION # 770
Refer to the exhibit.
Cisco IOS routers R1 and R2 are interconnected using interface Gi0/0. Which configuration allows R1 and R2 to form an OSPF neighborship on interface Gi0/0?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 771
An engineer must protect the password for the VTY lines against over-the-shoulder attacks. Which configuration should be applied?
- A. line vty 0 15 p3ssword XD822j
- B. username netadmin secret 7$1$42J36k33008Pyh4QzwXyZ4
- C. service password-encryption
- D. username netadmin secret 9 $9$vFpMf8elb4RVV8$seZ/bDA
Answer: C
Explanation:
Explanation
cisco(config)#username test privilege 15 password test777
cisco(config)#do s running-config | include user
username test privilege 15 password 0 test777
cisco(config)#service password-encryption
cisco(config)#do s running-config | include user
username test privilege 15 password 7 044F0E151B761B19
cisco(config)#
cisco(config)#do wr
Building configuration...
[OK]
cisco(config)#
NEW QUESTION # 772
When a wired client connects to an edge switch in a Cisco SD-Access fabric, which component decides whether the client has access to the network?
- A. edge node
- B. Identity services Engine
- C. RADIUS server
- D. control-plane node
Answer: B
NEW QUESTION # 773
Refer to the exhibit.
VPN-A sends point-to-point traffic to VPN-B and receives traffic only from VPN-C VPN-B sends point-to-point traffic to VPN-C and receives traffic only from VPN-A Which configuration is applied?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 774
A response code of 404 is received while using the REST API on Cisco UNA Center to POST to this URI.
/dna/intent/api/v1 /template-programmer/project
What does the code mean?
- A. The server has not implemented the functionality that is needed to fulfill the request.
- B. The client made a request a resource that does not exist.
- C. The POST/PUT request was fulfilled and a new resource was created, Information about the resource is in the response body.
- D. The request accepted for processing, but the processing was not completed.
Answer: B
Explanation:
Explanation
The 404 (Not Found) error status code indicates that the REST API can't map the client's URI to a resource but may be available in the future. Subsequent requests by the client are permissible.
NEW QUESTION # 775
Drag and drop the snippets onto the blanks within the code to construct a script that shows all logging that occurred on the appliance from Sunday until 9:00 p.m Thursday Not all options are used.
Answer:
Explanation:
Explanation:
Graphical user interface, text, application Description automatically generated
NEW QUESTION # 776
What are two device roles in Cisco SD-Access fabric? (Choose two.)
- A. access switch
- B. core switch
- C. vBond controller
- D. edge node
- E. border node
Answer: D,E
Explanation:
Explanation
There are five basic device roles in the fabric overlay:
+ Control plane node: This node contains the settings, protocols, and mapping tables to provide the endpoint-to-location (EID-to-RLOC) mapping system for the fabric overlay.
+ Fabric border node: This fabric device (for example, core layer device) connects external Layer 3 networks to the SDA fabric.
+ Fabric edge node: This fabric device (for example, access or distribution layer device) connects wired endpoints to the SDA fabric.
+ Fabric WLAN controller (WLC): This fabric device connects APs and wireless endpoints to the SDA fabric.
+ Intermediate nodes: These are intermediate routers or extended switches that do not provide any sort of SD-Access fabric role other than underlay services.
NEW QUESTION # 777
Drag and drop the characteristics from the left onto the protocols they apply to on the right?
Answer:
Explanation:
NEW QUESTION # 778
Refer to me exhibit.
Refer to the exhibit. A network operator is attempting to configure an IS-IS adjacency between two routers, but the adjacency cannot be established. To troubleshoot the problem, the operator collects this debugging output. Which interfaces are misconfigured on these routers?
- A. The R2 interface is configured as Level 1 only, and the Peer router interface is configured as Level 2 only
- B. The peer router interface is configured as Level 1 only, and the R2 interface is configured as Level 2 only
- C. The peer router interface is configured as point-as-point, and the R2 interface is configured as multipoint.
- D. The R2 interface is configured as point-to-point, and the peer router interface is configured as multipoint.
Answer: D
NEW QUESTION # 779
Drag and drop the characteristics from the left onto the routing protocols they describes on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 780
What is the structure of a JSON web token?
- A. header and payload
- B. three parts separated by dots: header, payload, and signature
- C. payload and signature
- D. three parts separated by dots: version, header, and signature
Answer: B
Explanation:
Explanation/Reference: https://auth0.com/docs/tokens/references/jwt-structure
NEW QUESTION # 781
Refer to me exhibit.
Refer to the exhibit. The connecting between SW1 and SW2 is not operational. Which two actions resolve the issue? (Choose two)
- A. configure switchport mode access on SW2
- B. configure switchport mode dynamic desirable on SW2
- C. configure switchport nonegotiate on SW2
- D. configure switchport mode trunk on SW2
- E. configure switchport nonegotiate on SW1
Answer: B,D
NEW QUESTION # 782
Which statement describes the IP and MAC allocation requirements for virtual machines on Type 1 hypervisors?
- A. Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes.
- B. Virtual machines do not require a unique IP or unique MAC. They share the IP and MAC address of the physical server.
- C. Each virtual machine requires a unique IP address but shares the MAC address with the physical server.
- D. Each virtual machine requires a unique MAC address but shares the IP address with the physical server.
Answer: A
NEW QUESTION # 783 
Refer to the exhibit. An engineer configures a new HSRP group. While reviewing the HSRP status, the engineer sees the logging message generated on R2. Which is the cause of the message?
- A. The HSRP configuration has caused a spanning-tree loop
- B. The HSRP configuration has caused a routing loop
- C. A PC is on the network using the IP address 10.10.1.1
- D. The same virtual IP address has been configured for two HSRP groups
Answer: D
NEW QUESTION # 784
Which technology is the Cisco SD-Access control plane based on?
- A. CTS
- B. SGT
- C. LISP
- D. VRF
Answer: C
NEW QUESTION # 785
What are two common sources of interference for Wi-Fi networks? (Choose two.)
- A. radar
- B. conventional oven
- C. LED lights
- D. fire alarm
- E. rogue
Answer: A,E
NEW QUESTION # 786
Refer to me exhibit.
Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 network via BGP and advertise them into OSPF are 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configurating must engineer apply to resolve the problem?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION # 787
Refer to the exhibit.
A company has an internal wireless network with a hidden SSID and RADIUS-based client authentication for increased security. An employee attempts to manually add the company network to a laptop, but the laptop does not attempt to connect to the network. The regulatory domains of the access points and the laptop are identical. Which action resolves this issue?
- A. Ensure that the "Connect even if this network is not broadcasting" option is selected.
- B. Use the empty string as the hidden SSID network name.
- C. Change the security type to WPA2-Personal AES.
- D. Limit the enabled wireless channels on the laptop to the maximum channel range that is supported by the access points.
Answer: A
NEW QUESTION # 788
An engineer must configure a multicast UDP jitter operation. Which configuration should be applied?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 789
Refer to the exhibit.
Which command set must be added to the configuration to analyze 50 packets out of every 100?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 790
Simulation 05
Refer to the exhibit.
Answer:
Explanation:
R1
enable
Config t
Int loop0
Ip ospf 1 area 0
Int et0/0
Ip ospf 1 area 0
Ip ospf network point-to-point
copy run start
R2
Enable
Config t
Int loop0
Ip ospf 1 area 0
Int et0/0
Ip ospf 1 area 0
Ip ospf network point-to-point
Int et0/1
Ip ospf 1 area 0
Ip ospf network point-to-point
copy run start
R3
Enable
Config t
Int loop0
Ip ospf 1 area 0
Int et0/1
Ip ospf 1 area 0
Ip ospf network point-to-point
copy run start
Verification:-
NEW QUESTION # 791
......
The Cisco 350-401 exam covers a broad range of topics, including network architecture, automation, security, routing, switching, and wireless technologies. It tests the ability of IT professionals to design, implement, and troubleshoot complex enterprise network solutions in a variety of scenarios. 350-401 exam also evaluates their proficiency in using industry-standard protocols and technologies to optimize network performance and ensure network security.
Download Latest & Valid Questions For Cisco 350-401 exam: https://www.trainingdump.com/Cisco/350-401-practice-exam-dumps.html
Ensure Success With Updated Verified 350-401 Exam Dumps: https://drive.google.com/open?id=1OwUhcLjaWdNHNzLE71bG4kz7yzcApZkl