Get Started: 350-401 Exam [2024] Dumps Cisco PDF Questions
350-401 Premium Exam Engine pdf Download
Cisco 350-401 Exam is designed for network engineers, designers, administrators, and technicians with at least three to five years of experience in enterprise networking. It is an online, proctored exam that consists of about 90 to 110 questions, which must be answered within 120 minutes. The passing score for the exam is about 750 to 850 points, depending on the variation of the exam.
Validity of 350-401 Exam
- It is valid for 03 years. These three years start from the date of issue. An annually updated Version can be purchased.
If you failed in 350-401 Exam, don't worry. Cleared in the previous exams, we guarantee you in the next exams. We will provide the dump with the updates. This is very important for the IT industry and many people do not know about it. Corrected candidates should apply to Pearson VUE for re-examination.
The vendor will contact the candidates for re-examination within two to four weeks. Update announcement will be released online. Luck and hard work. All the best for your future. If you are connected to hard duties and too much busy to take the exam. You will be happy to know that you can take the exam anytime in an annual; in Jan, Feb, Mar, Apr, Jun, Jul, Aug, Sep, or Oct. I suggest you take the exam in the morning; in a fresh mood.
NEW QUESTION # 731
Drag and drop the characteristics from the left onto the deployment models on the right.
Answer:
Explanation:
NEW QUESTION # 732
"HTTP/1.1 204 content" is returned when cur -I -x delete command is issued. Which situation has occurred?
- A. The object could not be located at the URI path.
- B. The object was located at the URI, but it could not be deleted.
- C. The URI was invalid
- D. The command succeeded in deleting the object
Answer: D
Explanation:
The HTTP status code 204 No Content indicates that the server has successfully processed the request, but is not returning any content. In the context of a curl -I -X DELETE command, this response typically means that the command succeeded in deleting the object. The server has acknowledged the deletion request and has processed it without any errors, but there is no additional content to send back to the client.
HTTP Status 204 (No Content) indicates that the server has successfully fulfilled the request and that there is no content to send in the response payload body.
NEW QUESTION # 733
Which statement describes the IP and MAC allocation requirements for virtual machines on types 1 hypervisors?
- A. Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes.
- B. Each virtual machines requires a unique IP address but shares the MAC address with the address of the physical server.
- C. Each virtual machine requires a unique IP address but shares the MAC address with the physical server
- D. Each virtual machine requires a unique MAC address but shares the IP address with the physical server.
Answer: A
Explanation:
Explanation
A virtual machine (VM) is a software emulation of a physical server with an operating system.
From an application's point of view, the VM provides the look
and feel of a real physical server, including all its components, such as CPU, memory, and network interface cards (NICs).
The virtualization software that creates VMs and performs the hardware abstraction that allows multiple VMs to run concurrently is known as a hypervisor.
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures. Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. answer 'Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes' big advantage of Type 2 hypervisors is that management console software is not required. Examples of type 2 hypervisor are VMware Workstation (which can run on Windows, Mac and Linux) or Microsoft Virtual PC (only runs on Windows).
NEW QUESTION # 734
Which Cisco FlexConnect state allows wireless users that are connected to the network to continue working after the connection to the WLC has been lost?
- A. Authentication- Down/Switch-Local
- B. Authentication Down/Switching Down
- C. Authentication-Central/Switch-Central
- D. Authentication-Central/Switch-Local
Answer: A
Explanation:
Operation Modes
There are two modes of operation for the FlexConnect AP.
* Connected mode: The WLC is reachable. In this mode the FlexConnect AP has CAPWAP connectivity with its WLC.
* Standalone mode: The WLC is unreachable. The FlexConnect has lost or failed to establish CAPWAP connectivity with its WLC. A WAN-link outage between a branch and its central site is a example of such a mode of operation.
FlexConnect States
A FlexConnect WLAN, depending on its configuration and network connectivity, is classified as being in one of the following defined states.
* Authentication-Central/Switch-Central: This state represents a WLAN that uses a centralized authentication method such as 802.1X, VPN, or web. User traffic is sent to the WLC via CAPWAP (Central switching). This state is supported only when FlexConnect is in connected mode.
* Authentication Down/Switching Down: Central switched WLANs no longer beacon or respond to probe requests when the FlexConnect AP is in standalone mode. Existing clients are disassociated.
* Authentication-Central/Switch-Local: This state represents a WLAN that uses centralized authentication, but user traffic is switched locally. This state is supported only when the FlexConnect
* AP is in connected mode.
* Authentication-Down/Switch-Local: A WLAN that requires central authentication rejects new users.
Existing authenticated users continue to be switched locally until session time-out if configured. The WLAN continues to beacon and respond to probes until there are no more existing users associated to the WLAN. This state occurs as a result of the AP going into standalone mode.
* Authentication-local/switch-local: This state represents a WLAN that uses open, static WEP, shared, or WPA2 PSK security methods. User traffic is switched locally. These are the only security methods supported locally if a FlexConnect goes into standalone mode. The WLAN continues to beacon and respond to probes. Existing users remain connected and new user associations are accepted. If the AP is in connected mode, authentication information for these security types is forwarded to the WLC.
NEW QUESTION # 735
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 736
Which entity is responsible for maintaining Layer 2 isolation between segments In a VXLAN environment?
- A. VNID
- B. host switch
- C. VTEP
- D. switch fabric
Answer: A
Explanation:
VXLAN uses an 8-byte VXLAN header that consists of a 24-bit VNID and a few reserved bits. The VXLAN header together with the original Ethernet frame goes in the UDP payload. The 24-bit VNID is used to identify Layer 2 segments and to maintain Layer 2 isolation between the segments.
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/vxlan/configuration/guide/b_Cisco
NEW QUESTION # 737
Refer to the exhibit. An engineer must allow the FTP traffic from users on 172.16.1.0 /24 to
172.16.2.0 /24 and block all other traffic. Which configuration must be applied?
- A. R1 (config)# access-list 120 deny any any
R1(config)# access-list 120 permit tcp 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 21 R1 (config)#interface giga 0/0 R1(config-if)#ip access-group 120 out - B. R1(config)# access-list 120 permit tcp 172.16.1.0 0.0.0.255 21 172.16.2.0 0.0.0.255 R1(config)# access-list 120 permit udp 172.16.1.0 0.0.0.255 21 172.16.2.0 0.0.0.255 R1 (config)#interface giga 0/2 R1(config-if)#ip access-group 120 out
- C. R1(config)# access-list 120 permit tcp 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 20 R1(config)# access-list 120 permit tcp 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 21 R1(config)#interface giga 0/2 R1 (config-if)#ip access-group 120 in
- D. R1(config)# access-list 120 permit tcp 172.16.1.0 0.0.0.255 21 172.16.2.0 0.0.0.255 R1 (config)#interface giga 0/2 R1 (config-if)#ip access-group 120 in
Answer: C
NEW QUESTION # 738
Which data plane protocol does EIGRP Over the Top use?
- A. IP-in-IP
- B. MPLS
- C. GRE
- D. LISP
Answer: D
NEW QUESTION # 739
Drag and drop the characteristics from the left onto the infrastructure deployment models on the right.
Answer:
Explanation:
NEW QUESTION # 740
Refer to the exhibit.
An engineer must deny Telnet traffic from the loopback interface of router R3 to the loopback interface of router R2 during the weekend hours. All other traffic between the loopback interfaces of routers R3 and R2 must be allowed at all times. Which command accomplish this task?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
To deny Telnet traffic from the loopback interface of router R3 to the loopback interface of router R2 during the weekend hours while allowing all other traffic at all times, the correct command is Option A. This command creates a time-range named "WEEKEND" that defines the weekend hours from midnight on Saturday to just before midnight on Sunday. It then specifies an access list (150) that denies TCP traffic (Telnet uses TCP port 23) from the loopback interface of R3 to that of R2 during the defined time-range. The access list also permits all other IP traffic at all times.
References: Implementing and Operating Cisco Service Provider Network Core Technologies source documents or study guide.
NEW QUESTION # 741
Drag and drop the characteristics from the left onto the orchestration tools that they describe on the right.
Answer:
Explanation:
Explanation:
A picture containing application Description automatically generated
NEW QUESTION # 742
Drag and drop the snippets onto the blanks within the code to construct a script that shows all logging that occurred on the appliance from Sunday until 9:00 p.m Thursday Not all options are used.
Answer:
Explanation:
NEW QUESTION # 743
Drag and drop the virtual components from the left onto their deceptions on the right.
Answer:
Explanation:
Explanation:
Diagram, line chart Description automatically generated
NEW QUESTION # 744
Refer to the exhibit.
An engineer configures a new WLAN that will be used for secure communications; however, wireless clients report that they are able to communicate with each other. Which action resolves this issue?
- A. Enable Client Exclusions.
- B. Enable Wi-Fi Direct Client Policy
- C. Enable P2P Blocking.
- D. Disable Aironet IE
Answer: C
NEW QUESTION # 745
Drag and drop the characteristics from the left onto the routing protocol they describe on the right
Answer:
Explanation:
NEW QUESTION # 746
Drag and drop the REST API authentication methods from the left onto their descriptions on the right.
Answer:
Explanation:
Explanation:
A picture containing text, clock, device, meter Description automatically generated
NEW QUESTION # 747
When PSK authentication is used on a WLAN, without the use of an ISE server, which of the following devices must be configured with the key string? (Choose two.)
- A. A RADIUS server
- B. All APs and WLCs
- C. All wireless clients
- D. One wireless client (each with a unique key string)
Answer: B,C
NEW QUESTION # 748
Refer to the exhibit.
The inside and outside interfaces in the NAT configuration of this device have been correctly identified. What is the effect of this configuration?
- A. dynamic NAT
- B. static NAT
- C. NAT64
- D. PAT
Answer: D
NEW QUESTION # 749
An engineer is configuring a GRE tunnel interface in the default mode. The engineer has assigned an IPv4 address on the tunnel and sourced the tunnel from an Ethernet interface. Which option also is required on the tunnel interface before it is operational?
- A. (config-if)#ip mtu <value>
- B. (config-if)#tunnel destination <ip address>
- C. (config-if)#ip tcp adjust-mss <value>
- D. (config-if)#keepalive <seconds retries>
Answer: B
Explanation:
A GRE interface definition includes:
+ An IPv4 address on the tunnel + A tunnel source + A tunnel destination Below is an example of how to configure a basic GRE tunnel:
interface Tunnel 0 ip address 10.10.10.1 255.255.255.0 tunnel source fa0/0 tunnel destination 172.16.0.2 In this case the "IPv4 address on the tunnel" is 10.10.10.1/24 and "sourced the tunnel from an Ethernet interface" is the command "tunnel source fa0/0". Therefore it only needs a tunnel destination, which is 172.16.0.2.
Note: A multiple GRE (mGRE) interface does not require a tunnel destination address.
NEW QUESTION # 750
Refer to the exhibit.
An engineer must create a manually triggered EEM applet to enable the R2 router interface and assign an IP address to it. What is required to complete this configuration?
- A. R2(config-apple)# event none sync yes
- B. R2(config-applel)# event oir
- C. R2(config)# event manager session cli username
- D. R2(config-apple)#action 4 cli command "ip add 172.16.1.1 0.0.0.255"
Answer: A
Explanation:
The correct answer is D, "R2(config-apple)# event none sync yes." This command is used to create a manually triggered EEM applet. The event none specifies that the applet is not automatically triggered by any event but can be manually run using the event manager run command. The sync yes option ensures that the commands are executed synchronously1. References := Cisco EEM Basic Overview and Sample Configurations
NEW QUESTION # 751
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
- A. security group tag ACL assigned to each router on a network
- B. security group tag number assigned to each user on a switch
- C. security group tag ACL assigned to each port on a switch
- D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses Security Group Tags (SGTs) to enforce access control policies across the network. SGTs are assigned to traffic at ingress points, and these tags are then used to make policy decisions as the traffic moves through the network. This allows for consistent policy enforcement regardless of the location of the user or device, making it scalable and secure. References: Implementing Cisco TrustSec (as part of Cisco's CCNP Security certification)
NEW QUESTION # 752
......
Cisco 350-401 ENCOR exam covers a wide range of topics related to enterprise networking, including network design, infrastructure, security, automation, and troubleshooting. It is a 120-minute exam that consists of 90-110 questions, and it can be taken either in-person or online. 350-401 exam is available in multiple languages, including English, Japanese, and Chinese.
Pass Your Cisco Exam with 350-401 Exam Dumps: https://www.trainingdump.com/Cisco/350-401-practice-exam-dumps.html
Verified 350-401 Bundle Real Exam Dumps PDF: https://drive.google.com/open?id=1OwUhcLjaWdNHNzLE71bG4kz7yzcApZkl