HCNP-LTE RNP & RNO H35-561 Practice Test Engine: Try These 62 Exam Questions
Guaranteed Success in HCNP-LTE RNP & RNO H35-561 Exam Dumps
NEW QUESTION 17
Which of the following are the reasons for the establishment of a service-related RRC connection? (Multiple Choice)
- A. MT-Access
- B. MO-Access
- C. MO-Data
- D. MT-Data
Answer: A,D
NEW QUESTION 18
What is the scheduling period of the MIB?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 19
Which of the following interface is based on the Diameter protocol?
- A. S6a
- B. S1-MME
- C. S1-U
- D. S11
Answer: A
NEW QUESTION 20
Which of the following options can improve the VOLTE uplink coverage technology? (Multiple Choice)
- A. ROHC
- B. Semi-static scheduling
- C. RLC segmentation
- D. TTI bundling
Answer: A,B,C,D
NEW QUESTION 21
Which of the following indicators can reflect the communication and maintenance capabilities of the system?
- A. RRC reconstruction success rate
- B. E-RAB call drop rate
- C. E-RAB establishes blocking rate
- D. Switching success rate
Answer: B
NEW QUESTION 22
In the switch measurement configuration message, which one is not included in the measured object?
- A. Measurement frequency
- B. Target system
- C. Measuring bandwidth
- D. Measurement duration
Answer: D
NEW QUESTION 23
In the LTE system, what is the PHICH differentiation of each user?
- A. Frequency division
- B. Time division
- C. Work points
- D. Code points
Answer: D
NEW QUESTION 24
The wireless layer access class information, which is allocated to a specific UE, including UE timers, common channel parameter configuration, will be broadcasted on which kind of the following system messages?
- A. SIB1
- B. MIB
- C. SIB2
- D. SIB3
Answer: C
NEW QUESTION 25
Regarding the peak rate and antenna settings of the LTE system, which of the following is correct?
- A. The uplink peak rate indicator needs to be met when the base station is configured with 1 receiving antennas.
- B. The downlink peak rate indicator needs to be met when the UE is configured with 2 receiving antennas.
- C. The uplink peak rate indicator needs to be met when the UE is configured with 1 receiving antennas.
- D. The downlink peak rate indicator needs to be met when the base station is configured with 2 receiving antennas.
Answer: C
NEW QUESTION 26
Which of the following events can be used to trigger a different switch? (Multiple Choice)
- A. A2
- B. A3
- C. A4
- D. A5
Answer: B,C,D
NEW QUESTION 27
For LTE system messages, which of the following statements are correct? (multiple choice)
- A. Except for SIB1, SIB2-SIB13 are all carried by SI (System Information), and SIB2 must be mapped in the first SI message.
- B. The transmission of SIB1 is completed through PDCCH scheduling carrying SI-RNTI (SI-RNTI is the same for each cell).
- C. SIB1 and all SI messages are transmitted on BCCH → DL-SCH → PDSCH.
- D. The Scheduling InfoList in SIB2 carries the scheduling information of all SIs. After receiving SIB2, other SI messages can be received.
Answer: A,B,C
NEW QUESTION 28
Regarding VOLTE called anchoring, which of the following descriptions is wrong?
- A. The caller may not be anchored when the caller is not in an LTE call.
- B. refers to the process of anchoring the VoLTE user under the CS network access to the IMS network to obtain the IMS service. The process of calling the user at the CS to route the call from the CS network to the IMS network for service processing
- C. There are two anchoring methods: TMRN front and IMRN
- D. Domain selection and anchoring may occur simultaneously
Answer: B
NEW QUESTION 29
Which of the following descriptions is correct?
- A. The attach type initiated by the VoLTE user is EPS-attach, and the attach type initiated by the CSFB user is combined attach.
- B. If the user's default APN is signed as the IMS APN in the HSS, the data APN is non-default, which will cause the user to activate the first default bearer with IMSIPN in all scenarios.
- C. In the Attach request, the UE will report the LTE voice capability (whether CSFB or VoIP is supported) to the MME.
- D. There are default bearers and dedicated bearers in LTE. Voices for VoIP must use dedicated bearers.
Answer: C
NEW QUESTION 30
Which of the following devices is the core of the multimedia module, responsible for registration authentication, session control, and service triggering of the terminal?
- A. PCRF
- B. I-CSCF: Query CSCF
- C. P-CSCF: Proxy CSCF
- D. S-CSCF: Service CSCF
Answer: D
NEW QUESTION 31
Which of the following types of special subframes does TDD-LTE contain?
- A. UpPTS
- B. Preamble
- C. DwPTS
- D. GP
Answer: A,C,D
NEW QUESTION 32
How many symbols can the UpPTS occupy in a special time slot? (Multiple choice)
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B,D
NEW QUESTION 33
Which channel coding method and coding rate are used by DCI?
- A. Tail biting convolutional coding, 1/2
- B. Turbo coding, 1/3
- C. Turbo coding, 1/2
- D. Tail biting convolutional coding, 1/3
Answer: D
NEW QUESTION 34
It is assumed that the two cells A and B are neighbor cells, and all are low-speed cells. The corresponding Ncs value is 119, and the root sequence index of the A cell is 20, which of the following values can be configured as the root sequence index of the B cell? (Multiple Choice)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: B,D,E
NEW QUESTION 35
How many codewords can be transmitted at most for a TT in the LTE system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 36
What are the channel coding scheme and coding rate used by the UL-SCH, the DL-SCH?
- A. Tail biting convolutional coding , 1/3
- B. Turbo coding , 1/3
- C. Turbo coding , 1/2
- D. Tail biting convolutional coding , 1/2
Answer: B
NEW QUESTION 37
In LTE system, UE initial attachment EPS establish a network, and has been maintained to give UE provides " always-on " of the IP connection, which of the following is the bearer?
- A. GBR bearer
- B. Default bearer
- C. Non-GBR bearer
- D. Dedicated bearer
Answer: B
NEW QUESTION 38
......
Test Engine to Practice H35-561 Test Questions: https://www.trainingdump.com/Huawei/H35-561-practice-exam-dumps.html