[Nov 19, 2024] SAP Dumps - Learn How To Deal With The (C-S43-2023) Exam Anxiety
DEMO FREE BEFORE YOU BUY C-S43-2023 DUMPS
NEW QUESTION # 13
You want to schedule a performance-based maintenance plan.
Which parameters are mandatory?
Note: There are 2 correct answers to this question.
- A. Scheduling period
- B. Counter overflow reading
- C. Start counter reading
- D. Estimated annual performance
Answer: C,D
Explanation:
Preventive Maintenance
NEW QUESTION # 14
Which steps support the maintenance technician in the Report and Repair Malfunction app (3 tiles)? Note:
There are 3 correct answers to this question
- A. Plan repair work for the responsible work center
- B. Assign a production resource tool (PRT) to the operation
- C. Find malfunction records already created in a list
- D. Complete the malfunction report
- E. Verify planned and actual costs
Answer: A,C,D
Explanation:
The Report and Repair Malfunction app supports the maintenance technician in the following steps:
* Plan repair work for the responsible work center: The app allows the technician to assign the work items to the work center that is responsible for the repair work. The work center can be a person, a group of persons
NEW QUESTION # 15
You want to set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents. What do you need to do? Note: There are 2 correct answers to this question
- A. Assign a measuring point as a production resources/tools (PRT) to a task list operation.
- B. Assign an inspection document as a PRT to the task list operation.
- C. Assign an inspection lot to the task list header
- D. Assign a piece of equipment with an allocated measuring point to a task list operation
Answer: A,D
Explanation:
To set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents, you need to do the following steps:
* Assign a piece of equipment with an allocated measuring point to a task list operation. This will allow you to inspect the equipment and record the measurement readings for the measuring point during the inspection round. You can assign the equipment either manually or automatically using the object list in the task list header1.
* Assign a measuring point as a production resources/tools (PRT) to a task list operation. This will allow you to inspect the measuring point and record the measurement readings for it during the inspection round. You can assign the measuring point either manually or automatically using the PRT category
0010 (Measuring Point) in the task list operation1.
* You do not need to assign an inspection lot to the task list header, as this is not required for inspection rounds. Inspection lots are used for quality inspections that are triggered by events such as goods receipt, production order, or sales order2.
* You do not need to assign an inspection document as a PRT to the task list operation, as this is not supported for inspection rounds. Inspection documents are used for quality inspections that are based on inspection plans and inspection characteristics2. References: PM - General maintenance task list and Set up your SAP S/4HANA system for EAM Inspection Checklists in SAP Help Portal.
NEW QUESTION # 16
Which functionalities are available in the SAP Service and Asset Manager (SAP Asset Manager) for a maintenance worker? Note: There are 2 correct answers to this question.
- A. Schedule resources
* Change task list - B. Display maps
* Display and maintain Technical Objects - C. Change BOM
* Create a work order on the ESRI map - D. Confirm time sheets
* Attach documents
Answer: B,D
Explanation:
Topic: 3
Preventive Maintenance
NEW QUESTION # 17
Which are the prerequisites for Inspection Checklist Processing?
Note: There are 2 correct answers to this question.
- A. Inspection point type assigned to the task list header
- B. Master inspection characteristics assigned to PM task list operations
- C. Classification data assigned to a technical object
- D. QM inspection plan with assigned inspection characteristics
Answer: A,B
Explanation:
Maintenance Processing - Advanced Functions
NEW QUESTION # 18
What are characteristics of the structure indicator?
Note: There are 2 correct answers to this question.
- A. It limits the types of characters in the edit mask to Alpha and Numeric.
- B. It restricts the number of hierarchical levels to no more than 6.
- C. It defines the allowed characters for a functional location.
- D. It sets the hierarchy levels of the functional location structure.
Answer: A,D
NEW QUESTION # 19
What do you have to consider when setting up the refurbishment process?
- A. Mark the order type for refurbishment in customizing.
- B. Assign a stock determination rule to the PM order type.
- C. Assign valuation type C to the order type.
- D. Assign a view profile for refurbishment to the order type.
Answer: A
Explanation:
Maintenance Processing - Advanced Functions
NEW QUESTION # 20
Which features can the planner use in a multiple-counter plan? Note: There are 2 correct answers to this question.
- A. Multiple time-based cycles
- B. Cycles with different dimensions
- C. Maintenance Strategy
- D. Change Repeat Factor
Answer: B
Explanation:
Preventive Maintenance
NEW QUESTION # 21
What do you need to configure to enable entries in the action log of a piece of equipment?
- A. Define history related fields in the usage period customizing.
- B. Define the corresponding history-related field for the equipment reference category.
- C. Activate the change documents for the equipment category.
- D. Activate the change documents for the equipment reference category.
Answer: A,D
Explanation:
Technical Objects
NEW QUESTION # 22
How can you assign a material BOM to a piece of equipment?
- A. Via field construction type
- B. Via field model number in the equipment master
- C. Via creation of an equipment BOM
- D. Via material BOM header in the serialization data
Answer: A
Explanation:
Topic: 2
User Interface and Mobile Maintenance
NEW QUESTION # 23
You want to create a single-cycle plan with a cycle of 12 months. You use the scheduling indicator Time-key date. The orders should be called 3 months before the planned date.How can you set up the maintenance plan?
Note: There are 2 correct answers to this question
- A. Set the call horizon to 75%
- B. Set the call horizon to 90 days.
- C. Set the offset to 3 months
- D. Set the call horizon to 25%.
Answer: A,B
NEW QUESTION # 24
How does a performance-based maintenance plan calculate the interval between start date and planned date?
- A. Cycle length divided by (annual performance / 365)
- B. Cycle length divided by annual performance
- C. Cycle length divided by ((scheduling period) x (cycle modification factor))
- D. Cycle length divided by (monthly performance x 12)
Answer: B
Explanation:
Topic: 4
Maintenance Processing - Advanced Functions
NEW QUESTION # 25
What do you have to consider when setting up phase-based maintenance?
- A. It can be used with any existing order type.
- B. It comes preconfigured when using the relevant Best Practices scope items.
- C. It is not possible to configure the nine delivered phases.
- D. It is mandatory for breakdown and Preventive Maintenance.
Answer: B
Explanation:
Topic: 5
Organizational Units and Master Data
NEW QUESTION # 26
You want to create a new functional location. Which selling is part of the Customizing for the functional location category? Note: There are 3 correct answers to this question
- A. Object information
- B. Status profile
- C. Usage period
- D. Measuring point category
- E. Warranty category
Answer: A,B,D
Explanation:
The Customizing for the functional location category includes the following settings: usage period, object information, and status profile.
* The usage period defines the start and end dates of the functional location's usage. It can be used to control the validity of maintenance plans and orders, and to calculate the age of the functional location. You can define the usage period in the Customizing activity Define Functional Location Categories1.
* The object information defines the additional data that can be entered for the functional location, such as manufacturer, construction type, serial number, and equipment number. You can define the object information in the Customizing activity Define Functional Location Categories1.
* The status profile defines the user statuses that can be assigned to the functional location. The user statuses can be used to control the business transactions that are allowed for the functional location, such as creating orders, notifications, or measuring documents. You can define the status profile in the Customizing activity Define Status Profile2.
References: 1: Define Functional Location Categories 2: Define Status Profile
NEW QUESTION # 27
Which of the following parameters are available when you define a new maintenance plan category? Note:
There are 3 correct answers to this question.
- A. Change documents
- B. Completion data
- C. Call object
- D. Maintenance activity type
- E. Order type
Answer: A,B,C
NEW QUESTION # 28
What are valid item categories for a BOM used in Asset Management? Note: There are 3 correct answers to this question.
- A. F (Functional location)
- B. L (Stock item)
- C. E (Equipment)
- D. D (Document item)
- E. I (PM Structure element)
Answer: B,D,E
Explanation:
Technical Objects
NEW QUESTION # 29
What do you need to configure to enable entries in the action log of a piece of equipment?
- A. Define history related fields in the usage period customizing.
- B. Activate the change documents for the equipment reference category.
- C. Define the corresponding history related field for the equipment reference category.
- D. Activate the change documents for the equipment category.
Answer: D
Explanation:
The action log is a function that allows you to view the changes that were made to fields during the processing of an order or a piece of equipment. The action log shows you the date, time, user, sub-object, field name, old value, and new value of each change. To enable entries in the action log of a piece of equipment, you need to activate the change documents for the equipment category. The equipment category is a classification of equipment that determines the data that can be maintained for the equipment. The change documents are records of the changes that are made to the data of the equipment. You can activate the change documents for the equipment category in the Customizing for Technical Objects under Equipment Define Equipment Categories . You do not need to define history related fields in the usage period customizing, as this is only relevant for the equipment history. The equipment history is a function that allows you to view the usage periods of the equipment, such as the installation, removal, or transfer dates. The history related fields are fields that are relevant for the equipment history, such as the functional location, the maintenance plant, or the cost center. You can define the history related fields in the Customizing for Technical Objects under Equipment Define History-Related Fields for Usage Periods . You do not need to define or activate the change documents for the equipment reference category, as this is only relevant for the equipment reference.
The equipment reference is a function that allows you to link a piece of equipment to another object, such as a material, a serial number, or a document. The equipment reference category is a classification of equipment references that determines the data that can be maintained for the equipment reference. You can define the equipment reference category in the Customizing for Technical Objects under Equipment Define Equipment Reference Categories . You can activate the change documents for the equipment reference category inthe Customizing for Technical Objects under Equipment Define Change Documents for Equipment Reference Categories . References:
* Display of the Action Log, section "Use"
* Equipment Categories, section "Change Documents"
* History-Related Fields for Usage Periods, section "History-Related Fields"
* Equipment Reference Categories, section "Change Documents"
NEW QUESTION # 30
......
SAP C-S43-2023 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Latest SAP C-S43-2023 Dumps with Test Engine and PDF: https://www.trainingdump.com/SAP/C-S43-2023-practice-exam-dumps.html
Now, get the NEWEST C-S43-2023 dumps in Test Engine from: https://drive.google.com/open?id=1zqtretsyIvKSw3bsCAqqLwVhagS5O1Gh