[Dec 26, 2021] HPE6-A72 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Pass HPE6-A72 Exam - Real Test Engine PDF with 90 Questions
Understanding functional and technical aspects of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Object Management
The following will be discussed in HP HPE6-A72 dumps:
- Introduction to NetEdit
- Frames, packets, and segments
- Layer 2 to Layer 7 pointers
- Segments & Encapsulation
- Installation of NetEdit
- What is the meaning of a network?
- TCP/Internet Protocol Stack (IP addressing & Transport Protocols TCP/UDP)
- ArubaOS-CX Mobile App
- Open Systems Interconnection Reference Model
- Simple Network Management Protocol
- Kinds of traffic
- Radius-based management authorization
- Management VRF
- Out-of-band management port
- Fundamental maintenance with NetEdit
- Company password recovery
- Configuration file management (Backup, restore, checkpoint and rollback)
- OS image administration (Restoration)
- Network interface
- Safe Administration Protocols: AAA, SSH, HTTPS, RBAC
- What is the meaning of a Protocol?
NEW QUESTION 50
Which two options are the Layer 2 protocols? (Choose two.)
- A. STP
- B. 802.11af
- C. 802.1Q
- D. RIP
- E. IPSec
Answer: A,C
NEW QUESTION 51
What command displays information regarding the secondary image installed on an AOS-CX switch?
- A. show version
- B. show version detail
- C. show images
- D. show secondary
Answer: C
NEW QUESTION 52
Which switch supports a maximum of 8 line-cards, 3 fabric modules, and 2 management cards?
- A. Aruba 8400
- B. Aruba 5412r
- C. Aruba 6410
- D. Aruba 8408
Answer: A
NEW QUESTION 53
Refer to the exhibit.
Which command produces the above output?
- A. show interface port 1/1/10 switchport
- B. show interface port 1/1/10 trunk
- C. show vlan port 1/1/10
- D. show trunk port 1/1/10 extended
Answer: D
NEW QUESTION 54
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command inventory
- B. The command version
- C. The command show running-configuration
- D. The command show system
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 55
What is the correct description of a Multi-Layer Switch?
- A. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches
- B. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
- C. any switch that supports PoE, LLDP-MED and Flow Control
- D. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
Answer: B
NEW QUESTION 56
Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?
- A. 10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet
- B. 10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet
- C. 10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet
- D. Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet
Answer: B
NEW QUESTION 57
Click on the colored box that corresponds with the line that best represents Multicast traffic flow.
Answer:
Explanation:
Explanation:
Blue Box
NEW QUESTION 58
What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?
- A. Demodulation
- B. Encapsulation
- C. Propagation
- D. Modulation
Answer: B
NEW QUESTION 59
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: B
NEW QUESTION 60
What are two features of the three-tier designs? (Choose two.)
- A. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments
- B. uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer
- C. is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided
- D. adds a distribution layer to free up resources from the Core for improved performance and routing throughput
- E. a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments
Answer: D,E
NEW QUESTION 61
Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)
- A. Stacking switches using VSF or VSX will disable the Checkpoint feature.
- B. Rolling back to a prior checkpoint triggers a reboot of the switch.
- C. A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.
- D. Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.
- E. System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.
Answer: C,D
NEW QUESTION 62
Refer to the exhibit.
What command will display the debug l2mac events?
- A. show module L2MAC
- B. show debug buffer module L2MAC
- C. show debug all
- D. show debug terminal
Answer: B
NEW QUESTION 63
Refer to the exhibit.
What is the correct binary conversion of the last two hexadecimal characters of the physical address?
- A. 1001 1111 0101 0011
- B. 1110 1101
- C. 1101 1000
- D. 1000 1101 1110 1101
Answer: B
NEW QUESTION 64
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. ping
- B. traceroute
- C. tracert
- D. netstatus
- E. pathping
Answer: A,B
NEW QUESTION 65
Match each description to the correct management tool for Aruba AOS-CX.
Answer:
Explanation:
NEW QUESTION 66
What are two features in a 2-Tier design that are implemented at the Access layer? (Choose two.)
- A. Deep packet inspection
- B. Endpoint Access
- C. WAN/MPLS connectivity
- D. Power over Ethernet
- E. VPN access
Answer: B,D
NEW QUESTION 67
Match each network protocol to the correct server listening port. Not all answers will be used.
Answer:
Explanation:
NEW QUESTION 68
What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?
- A. copy running-config checkpoint startup-config
- B. copy running-config default
- C. copy running-config initial-checkpoint
- D. copy startup-config running-config
Answer: A
NEW QUESTION 69
Refer to the exhibit.
All four switches in the diagram have been configured with the region name "Aruba1".
What two other MSTP configurations must match for switches within the same MST region? (Choose two.)
- A. MST region type
- B. MST VLAN to instance mapping
- C. MST revision number
- D. MST version number
- E. MST Bridge ID
Answer: B,C
NEW QUESTION 70
......
Get New HPE6-A72 Certification Practice Test Questions Exam Dumps: https://www.trainingdump.com/HP/HPE6-A72-practice-exam-dumps.html
Real HPE6-A72 Exam Dumps Questions Valid HPE6-A72 Dumps PDF: https://drive.google.com/open?id=1h7zYaD0iZdk2m7ZsVU4liPvUASaUvWOD