Maximum Grades By Making ready With HPE6-A72 Dumps UPDATED 2022
Prepare HPE6-A72 Exam Questions [2022] Recently Updated Questions
NEW QUESTION 26
Which port or ports should be allowed through a firewall so that an AOS-CX switch can act as an SNMP Agent?
- A. UDP 162
- B. UDP 1812 and UDP 1813
- C. UDP 161
- D. TCP 443
Answer: C
NEW QUESTION 27
What is the correct description of a Multi-Layer Switch?
- A. any switch that supports PoE, LLDP-MED and Flow Control
- B. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
- C. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
- D. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches
Answer: B
NEW QUESTION 28
What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?
- A. Encapsulation
- B. Modulation
- C. Propagation
- D. Demodulation
Answer: A
NEW QUESTION 29
Which two statements accurately describe stacking with Aruba switches? (Choose two.)
- A. A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.
- B. The VSF feature is not compatible between AOS-CX and AOS platforms.
- C. VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.
- D. A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.
- E. VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models.
Answer: C,E
NEW QUESTION 30
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: C
NEW QUESTION 31
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:
NEW QUESTION 32
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Better Core router performance by offloading processing
- B. Shifting endpoint access to the Aggregation layer from the Access layer
- C. Using access control lists (ACLs) at the Core to improve performance
- D. Connecting WAN/MPLS and Data center access to the Aggregation layer
Answer: A
NEW QUESTION 33
What is the binary conversion of the hexadecimal value 0x2001?
- A. 0011 0000 0000 0001
- B. 0002 0000 0000 0001
- C. 0010 0001
- D. 0010 0000 0000 0001
Answer: D
NEW QUESTION 34
Which network category applies to a SOHO internal network?
- A. LAN
- B. SD-WAN
- C. WAN
- D. Internet
Answer: D
NEW QUESTION 35
What command displays information regarding the secondary image installed on an AOS-CX switch?
- A. show version
- B. show secondary
- C. show images
- D. show version detail
Answer: C
NEW QUESTION 36
Refer to the exhibit.
Which command produces the above output?
- A. show trunk port 1/1/10 extended
- B. show interface port 1/1/10 switchport
- C. show vlan port 1/1/10
- D. show interface port 1/1/10 trunk
Answer: A
NEW QUESTION 37
What are two features of the three-tier designs? (Choose two.)
- A. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments
- B. adds a distribution layer to free up resources from the Core for improved performance and routing throughput
- C. uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer
- D. a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments
- E. is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided
Answer: B,D
NEW QUESTION 38
What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)
- A. HTTPS
- B. USB-C console
- C. SNMPv2c
- D. Telnet
- E. SSH
Answer: A,E
NEW QUESTION 39
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization. What command should be used to enable terminal output line by line or page by page?
- A. The command more
- B. The command less
- C. The command page
- D. The command terminal length 30
Answer: C
NEW QUESTION 40
Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)
- A. save
- B. copy config config1 config startup-config
- C. write memory
- D. copy running-config startup-config
- E. copy running-config checkpoint boot-config
Answer: C,D
NEW QUESTION 41
Refer to the exhibit
Which command on Access-2 port 1/1/4 will enable connectivity between PC-1 and Server-1 without any routing enabled in the network?
- A. Access-2 (config-if-1/1/4)# vlan access 20
- B. Access-2 (config-if-1/1/4)# vlan access 1, 10, 20, 255
- C. Access-2 (config-if-1/1/4)# vlan 20 untag 1/1/4
- D. Access-2 (config-if-1/1/4)# vlan trunk allow 1, 10, 255
Answer: A
NEW QUESTION 42
Which statement is true regarding modern switching requirements?
- A. Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options.
- B. While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.
- C. Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.
- D. Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethernet needs.
Answer: A
NEW QUESTION 43
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION 44
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
- A. copy sftp://[email protected]/GL.10.04.0003.swi secondary
- B. copy secondary tftp://[email protected]/GL.10.04.0003.swi
- C. copy secondary sftp://[email protected]/GL.10.04.0003.swi
- D. backup secondary sftp://[email protected]/GL.10.04.0003.swi
Answer: C
NEW QUESTION 45
......
Give push to your success with HPE6-A72 exam questions: https://www.trainingdump.com/HP/HPE6-A72-practice-exam-dumps.html
HPE6-A72 100% Guarantee Download HPE6-A72 Exam PDF Q&A: https://drive.google.com/open?id=1W15DqY3p3ekd36gRbmAsSvkaUgAwaRlI