[Jun 25, 2023] 100% Pass Guarantee for HPE6-A72 Dumps with Actual Exam Questions
Today Updated HPE6-A72 Exam Dumps Actual Questions
NEW QUESTION # 41
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. allows transmissions of up to 4.8Gbps
- B. operates in both the 2.4GHz and 5GHz radios bands
- C. operates only in the 5GHz similar to 802.11ac
- D. is an emerging satellite connection standard to allow wireless access anywhere in the world
- E. is the first WLAN standard to no longer use electromagnetic signals to transmit data
Answer: A,B
Explanation:
Explanation/Reference:
NEW QUESTION # 42
Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)
- A. ISIS
- B. EIGRP
- C. Local
- D. RIPng
- E. BGP
Answer: C,E
NEW QUESTION # 43
Which two options are the Layer 2 protocols? (Choose two.)
- A. IPSec
- B. 802.1Q
- C. RIP
- D. 802.11af
- E. STP
Answer: B,E
NEW QUESTION # 44
What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?
- A. Encapsulation
- B. Demodulation
- C. Propagation
- D. Modulation
Answer: A
NEW QUESTION # 45
The customer has 778 developers testing computer games on the network.
Which two actions resolve Broadcast storms? (Choose two.)
- A. Utilize Spanning Tree to dynamically disable all redundant links in a segment.
- B. Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.
- C. Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).
- D. Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
- E. Manually disable the redundant link to immediately resolve the impacted portion of the network.
Answer: A,E
NEW QUESTION # 46
What is the correct description of a Multi-Layer Switch?
- A. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
- B. any switch that supports PoE, LLDP-MED and Flow Control
- C. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
- D. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches
Answer: C
NEW QUESTION # 47
Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)
- A. copy running-config checkpoint boot-config
- B. write memory
- C. copy config config1 config startup-config
- D. copy running-config startup-config
- E. save
Answer: B,D
NEW QUESTION # 48
Refer to the exhibit.
All four switches in the diagram have been configured with the region name "Aruba1".
What two other MSTP configurations must match for switches within the same MST region? (Choose two.)
- A. MST Bridge ID
- B. MST VLAN to instance mapping
- C. MST version number
- D. MST region type
- E. MST revision number
Answer: B,E
NEW QUESTION # 49
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION # 50
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION # 51
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?
- A. Core(config-if-vlan)# vrf attach Green
- B. Core(config-if-vlan)# ip vrf forwarding Green
- C. Core(config-if-vlan)# routing-context Green vrf
- D. Core(config-if-vlan)# ip vpn-instance Green
Answer: A
NEW QUESTION # 52
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: C
Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
NEW QUESTION # 53
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
- A. copy secondary sftp://[email protected]/GL.10.04.0003.swi
- B. backup secondary sftp://[email protected]/GL.10.04.0003.swi
- C. copy sftp://[email protected]/GL.10.04.0003.swi secondary
- D. copy secondary tftp://[email protected]/GL.10.04.0003.swi
Answer: A
NEW QUESTION # 54
Refer to the exhibit.
Switch-1 is not the root bridge. The ports shown are all the connected pointtopoint interfaces. What Role (hidden by the blue rectangle) will be assigned to the Lag 1 interface?
- A. Alternate
- B. Designated
- C. Backup
- D. Root
Answer: D
NEW QUESTION # 55
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?
- A. Host-B: assign the default-gateway address 10.1.20.181
- B. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1
- C. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
- D. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
Answer: C
NEW QUESTION # 56
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 2/3/17
- B. 8400(config)# interface 2/4/15
- C. 8400(config)# interface 1/7/16
- D. 8400(config)# interface 1/4/15
Answer: B
NEW QUESTION # 57
Which port or ports should be allowed through a firewall so that an AOS-CX switch can act as an SNMP Agent?
- A. UDP 1812 and UDP 1813
- B. UDP 161
- C. TCP 443
- D. UDP 162
Answer: B
NEW QUESTION # 58
Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?
- A. 10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet
- B. 10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet
- C. Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet
- D. 10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet
Answer: A
NEW QUESTION # 59
What is Deep Packet Inspection?
- A. a concept that applies to firewalls, when examining packets only up through Layer 4
- B. a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address
- C. a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign
- D. a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied
Answer: D
NEW QUESTION # 60
Match each network protocol to the correct default listening port and transport protocol. Not all answers will be used.
Answer:
Explanation:
NEW QUESTION # 61
You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.
What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
- A. boot system secondary 10
- B. checkpoint auto confirm 10
- C. checkpoint auto 10
- D. checkpoint rollback 10
Answer: C
NEW QUESTION # 62
Refer to the exhibit
What is true regarding VLAN 50 according to the diagram above?
- A. VLAN 50 was never added to the vlan-database and therefore is in a down state.
- B. VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
- C. Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
- D. VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
Answer: C
NEW QUESTION # 63
Place the OSI Layers in the correct order. Arrange them from least to greatest, starting with Layer 1 on the top, and progressing to Layer 7 on the bottom.
Answer:
Explanation:
1 - physical Layer
2 - Data Link Layer
3 - Network Layer
4 - Transport Layer
5 - Session Layer
6 - Presentation Layer
7 - Application Layer
NEW QUESTION # 64
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:
NEW QUESTION # 65
Refer to the exhibit.
What command (output shown above) gives the optics serial number and part number information?
- A. show interface transceiver
- B. show interface optics
- C. show inventory
- D. show interface physical
Answer: A
NEW QUESTION # 66
......
HPE6-A72 exam dumps with real HP questions and answers: https://www.trainingdump.com/HP/HPE6-A72-practice-exam-dumps.html
HPE6-A72 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1h7zYaD0iZdk2m7ZsVU4liPvUASaUvWOD