[Oct-2021] Dumps Brief Outline Of The 300-615 Exam - TrainingDump
300-615 Training & Certification Get Latest CCNP Data Center
NEW QUESTION 54
Refer to the exhibit.
An attempt to bind the Ethernet interface to vFC fails. Which action resolves the issue?
- A. Add the FCoE VLAN to the allowed VLAN list.
- B. Configure the FCoE VLAN that corresponds to the vFC VSAN as a private VLAN.
- C. Configure the interface to use the native VLAN of the trunk port.
- D. Configure the interface as a trunk port.
Answer: D
NEW QUESTION 55
Refer to the exhibit.
The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?
- A. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- B. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- C. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- D. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
Answer: A
Explanation:
Explanation
Need exact snap shot to confirm the following.
The selection of is due to
* SNMP command has the key word "oid".
* The command "switchto vdc Core" show run in "enable" mode, not "config t" mode.
NEW QUESTION 56
Refer to the exhibit.
The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
- A. configure terminal action
- B. event statement
- C. event-default action statement
- D. environment variable
Answer: B
NEW QUESTION 57 
Refer to the exhibit. A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?
- A. Replace the SFP port module in fc2/10.
- B. Configure the BB_credit buffers on the upstream switch that connects the port.
- C. Enable NPIV on the upstream switch that connects the port.
- D. Configure the admin port type E on the upstream switch that connects the port.
Answer: C
Explanation:
Section: Storage Network
NEW QUESTION 58
An upgrade of protected RPMs from the Bash shell did not take effect. Which action is required for the changes to take effect?
- A. Upgrade the RPMs from the Guest shell.
- B. Restart the Bash shell.
- C. Disable and reenable the Bash feature.
- D. Reload the switch.
Answer: C
NEW QUESTION 59
A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to be attempted to resolve the issue? (Choose two.)
- A. Set a different primary IP addresses on NVE source-interface.
- B. Set a different distributed gateway virtual MAC address.
- C. Set a different secondary IP addresses on NVE source-interface.
- D. Configure the same VNI to multicast group maping.
- E. Configure the NVE interfaces to be Up on both switches.
Answer: D,E
Explanation:
Section: Network
NEW QUESTION 60
Cisco Unified Computing System Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops.
Which action resolves the issue?
- A. Modify the VLAN assignment to vNICs.
- B. Change the PIN groups on the vHBAs.
- C. Modify the FCoE VLAN.
- D. Set the FCoE VLAN as the native VLAN on server uplinks.
Answer: A
Explanation:
Section: Compute Platforms
NEW QUESTION 61 
Refer to the exhibit. Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
- A. Configure the upstream ports and the server ports to be in VSAN 100.
- B. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100.
- C. Activate the correct zoneset for VSAN 100.
- D. Update the FCNs database to contain names for VSAN 100.
Answer: A
Explanation:
Section: Compute Platforms
NEW QUESTION 62
After upgrading a client's fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)
- A. Service profiles page, InternalBackup stage
- B. Equipment FSM page, InternalBackup stage
- C. Admin page, InternalBackup stage.
- D. Admin page, PollInternalBackup stage
- E. Equipment FSM page, PollInternalBackup stage
Answer: B,D
Explanation:
Section: Management and Operations
NEW QUESTION 63
Refer to the exhibit.
A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?
- A. action 2.0 event-default
- B. event policy-default count 1 time 100
- C. event cli match 'configure terminal'
- D. event syslog occurs 10
Answer: A
NEW QUESTION 64 
Refer to the exhibit. An OSPF adjacency between Router-A and Router-B fails to reach the FULL state. Which action resolves the issue?
- A. Set the OSPF media type to point-to-point.
- B. Adjust the MTU on Router-B to 1604.
- C. Adjust the MTU on Router-A to 1600.
- D. Disable the check of the MTU value.
Answer: D
Explanation:
Section: Network
NEW QUESTION 65 
Refer to the exhibit. An engineer troubleshoots why user 1, user 2, and user 3 from the group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Configure SSH logins on the Cisco MDS switch.
- B. Integrate Cisco MDS with Microsoft Active Directory.
- C. Include specific users in the Cisco MDS role configuration.
- D. Configure the role name to match the group name on Microsoft Active Directory.
Answer: D
Explanation:
Section: Storage Network
NEW QUESTION 66
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 67
Refer to the exhibit.
A network engineer has connected the Nexus switch management port to the Internet using DHCP to allow the Guest shell running on the switch to download Python packages. The engineer can ping google.com successfully from the Nexus switch, but the Guest shell failed to download any Python packages. Which action resolves the problem?
- A. Manually configure NTP in the Guest shell.
- B. Update the Python packages on the Cisco Nexus switch directly.
- C. Connect Guest shell to data plane interfaces to be able to connect to the networks outside the Cisco Nexus switch.
- D. Manually configure DNS in the Guest shell, even if it is claimed on the Cisco Nexus switch through DHCP.
Answer: D
NEW QUESTION 68
Refer to the exhibit.
The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
- A. configure terminal action
- B. event statement
- C. event-default action statement
- D. environment variable
Answer: B
NEW QUESTION 69
An engineer is implementing a storage VDC, but fails. Which two prerequisites must be in place before a storage VDC is implemented? (Choose two.)
- A. STORAGE-ENT license
- B. F-Series module
- C. FCoE license
- D. M-Series module
- E. ESSENTIALS license
Answer: B,C
Explanation:
Section: Storage Network
NEW QUESTION 70
Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
- A. Configure HSRP version 2.
- B. Set the MTU to 1500 bytes.
- C. Enable IP redirects.
- D. Configure the same HSRP group on both devices.
Answer: A
NEW QUESTION 71
......
Certification Training for 300-615 Exam Dumps Test Engine: https://www.trainingdump.com/Cisco/300-615-practice-exam-dumps.html
CCNP Data Center 300-615 Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=18_XFv5fgKHuc5eyMzmrj43-8wAIBc32H